HUANUO HNCM9 (26 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
Can this mount be installed on particle board?
No, the product should not be used on particle board. Ensure the installation surface is sturdy and suitable for supporting the weight of the monitor.
What tools are required for assembly?
The Allen Key (o), Wrench (p), and M5x14 Bolts (f) are needed for most steps. Additional bolts and washers may be required depending on the installation method.
How do I install the C-clamp brace?
Attach the 'C' Clamp Brace (c) to the Pole (a) using 3 M5x14 Bolts (f). Tighten with an Allen Key (o), and adjust based on table thickness, which can be set in three positions.
What are the installation options for desk mounts?
There are two main methods: installing via a C-clamp or using a grommet base. Each method requires specific bolts, washers, and positioning adjustments to secure the mount properly.
How do I adjust the thickness of the table top for installation?
The 'C' Clamp can be adjusted in three positions: 11-74 mm (0.43"-2.95"), 26-89 mm (1"-3.5"), and 41-104 mm (1.6"-4") to accommodate different table thicknesses.
What should I do if the existing grommet hole has a plastic protector?
Remove any plastic protectors from the grommet hole before installation to ensure a flat surface for secure mounting and prevent damage during attachment.
How do I attach the swivel arm to the pole?
Install the Swivel Arm (d) on the Pole (a), securing it with the provided Allen Key (o). Attach Wire Clips (n1, n2) for cable management and ensure proper positioning.
What safety precautions should I take during installation?
Ensure the mount is securely attached to a stable horizontal surface. Failure to do so may result in injury or damage due to improper installation leading to potential falls of the monitor.
How many bolts are required for securing the pole to the desk?
Depending on the method, you will need 3 M5x14 Bolts (f) for attaching the C-clamp brace and additional bolts such as M8x12 or M10 depending on whether a grommet base is used.
What should I do if my monitor has a curved back?
For monitors with curved or recessed backs, position them carefully on the swivel arm to ensure proper support and alignment. Use Wire Clips (n1, n2) for cable management while maintaining stability during installation.