SlimLine SLTLU (52 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum weight capacity of this mount?
The maximum UL load capacity of this mount is 100 lb (45.4 kg). It is designed to support the combined load of the equipment and hardware securely, provided the installation is done correctly on suitable surfaces.
Can this mount be used on drywall?
No, this mount is not intended for use on drywall. It is designed for installation on wood stud walls, solid concrete (minimum 2000 psi density), or cinder block walls. Using it on drywall could lead to product failure or personal injury.
What tools are required for installation?
The tools needed for installation include a Phillips screwdriver, a drill, a level, and optionally a hammer. Screws and anchors are provided with the mount, but you may need additional tools depending on the surface type.
How do I install this mount on concrete?
To install on concrete, level the wall plate and mark the mounting holes. Drill holes into the concrete, insert anchors, place the wall plate over the anchors, and secure with screws. Ensure the anchors are placed in solid parts of the concrete, not in mortar joints.
What is the recommended depth for the screen?
The depth of the screen must be less than 2 inches. This mount is designed to attach the screen 0.68 inches from the wall. Ensure the screen is installed at the correct distance to avoid risk of injury or property damage.
How do I attach the tilt brackets to the screen?
To attach the tilt brackets, fully extend them and place them on the back of the screen. Align them with the holes and center them vertically. Use the appropriate combination of screws, washers, and spacers as required for your screen type.
What should I do if the screws are difficult to tighten?
If the screws are difficult to tighten, ensure that the mounting holes are properly aligned and that the screws are not over-tightened. Over-tightening can cause damage to the mount or the screen. Use the correct screw size and follow the installation guide carefully.
Can I use spacers to increase the distance between the wall and screen?
Yes, spacers can be used to increase the distance between the wall and the screen, depending on the screen manufacturer's requirements. Use spacer P for an additional 0.5 inches or spacer Q for an additional 0.75 inches.