LIMIT 310 (132 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to replace the batteries?
To replace the batteries, switch the dial to the 'OFF' position and remove the test leads from the input terminal. Take off the protective case, loosen the screw on the battery cover, and replace with two AAA batteries, ensuring the correct polarity.
What is the maximum voltage for AC/DC measurement?
The maximum voltage for AC/DC measurement is 250 Vrms. Ensure the tested voltage does not exceed this value to avoid damage to the meter or risk of electric shock.
What are the safety standards for this multimeter?
This multimeter complies with CE standards: EN 61010-1: 2010, EN 61010-2-030:2010, EN 61326:2013, CAT II 250 V, RoHS, pollution grade II, and double insulation standards.
How to measure AC voltage?
To measure AC voltage, switch the dial to 'V~' position. Insert the black test lead into the COM jack and the red test lead into the 'V/Ω/mA' jack. Connect the test leads in parallel with the load and ensure the voltage does not exceed 250 Vrms.
What is the temperature measurement range?
The temperature measurement range is from -40°C to 1000°C (-40°F to 1832°F). Use a K-thermocouple for accurate readings and ensure the temperature does not exceed 250°C (482°F).
How to measure DC current?
To measure DC current, switch the dial to 'A' position. Insert the black test lead into the COM jack and the red test lead into the '10A MAX' jack. Connect the test leads in series with the circuit and ensure the current does not exceed 10 A.
What is the resistance measurement range?
The resistance measurement range is from 200 Ω to 20 MΩ. Ensure the circuit is powered off before measurement and fully discharge all capacitors to avoid inaccurate readings.
How to test continuity?
To test continuity, switch the dial to the continuity test position. Insert the black test lead into the COM jack and the red test lead into the 'V/Ω/mA' jack. Connect the test leads in parallel with the points to be tested. If resistance is ≤ 10 Ω, the buzzer will beep, indicating a good connection.
What is the accuracy of the multimeter?
The accuracy of the multimeter is ± (0.7% of reading + 3) for most measurements. For temperature measurements, the accuracy is ± (1.2% of reading + 3). The temperature coefficient is 0.1 × (specified accuracy) per °C.
How to handle low battery warnings?
If the battery voltage drops below 2.5 V, the low battery symbol will flash every 6 seconds. If the voltage drops below 2.2 V, the symbol will remain solid, and the meter will not function. Replace the batteries immediately to avoid inaccurate readings.