Refco X-475 (85 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum DC voltage the meter can measure?
The meter can measure up to 1000V DC. Attempting to measure higher voltages may result in electrical shocks or damage to the instrument.
How do I measure DC voltage?
Select the DC voltage position (V), insert the red test lead into the V/Ω jack and the black lead into the COM jack, connect them to the circuit under test, and read the displayed value. If 'O.L' appears, use a higher range.
What is the maximum AC voltage the meter can measure?
The meter can measure up to 750V RMS AC. Attempting to measure higher voltages may result in electrical shocks or damage to the instrument.
How do I measure AC voltage?
Select the AC voltage position (V~), insert the red test lead into the V/Ω jack and the black lead into the COM jack, connect them to the circuit under test, and read the displayed value. If 'O.L' appears, use a higher range.
What is the purpose of the HOLD function?
The HOLD function freezes the measured value on the display. Press the HOLD key again to disable it and resume normal operation. This is useful for capturing stable readings during measurements.
How do I measure resistance and continuity?
Select the resistance position (Ω), insert the test leads into the appropriate jacks, and connect them to the component under test. A beep indicates continuity, while the resistance value is displayed.
What is the function of the PK/REL key?
The PK/REL key allows you to measure peak values or perform relative measurements. Pressing it cyclically measures and saves peak values, while holding it for 3 seconds initiates auto calibration. For relative measurements, the meter saves an offset value for subsequent readings.
How does the meter handle distorted waveforms?
The meter uses true root mean square (TRMS) measurement, which accounts for all harmonics in the waveform. This provides more accurate readings compared to mean value instruments, especially with distorted signals.
What is the Auto Power Off function?
The Auto Power Off function turns the meter off automatically 30 minutes after the last selector rotation or function selection. This helps conserve battery life and ensures the meter is not left on unnecessarily.
How do I disable the Auto Power Off function?
To disable the Auto Power Off function, turn the meter off, then turn it back on while holding the PK/REL, MX/MN, and R/SEL keys. The meter will remain on continuously until manually turned off.