RS Pro RS-9985 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I measure AC voltage with the insulation tester?
To measure AC voltage, set the function switch to the green VAC/Hz/% position. Insert the black test lead into the negative COM jack and the red test lead into the positive V jack. Touch the probes to the circuit's neutral and 'hot' sides respectively. Read the voltage on the main display and frequency in the right auxiliary display.
What should I do if the meter shows OL during a measurement?
If the meter displays 'OL', it means the value exceeds the selected range. Change to a higher range to get an accurate reading. This is common when measuring high resistance or voltage values.
How can I measure insulation resistance safely?
To measure insulation resistance, set the function switch to the INSULATION position and select the appropriate test voltage using the RANGE button. Connect two testing lines to the equipment under test. Ensure all power is disconnected before starting the measurement.
What precautions should I take when measuring high voltages?
When measuring high voltages, always disconnect power from the circuit and discharge capacitors beforehand. Use insulated test leads and avoid touching live parts. The meter has a double insulation rating for added safety.
How do I measure temperature with this device?
To measure temperature, set the function switch to the green temp position. Insert the temperature probe into the input jacks while observing correct polarity. Touch the probe head to the object being measured until the reading stabilizes.
What is the maximum current I can safely measure?
The meter allows measuring up to 20 A DC or AC, but do not exceed 30 seconds of continuous measurement. Prolonged use may damage the device and test leads. Always ensure power is disconnected before taking measurements.
How can I store data from this insulation tester?
To store data, press the STORE button to enter storage mode. The meter will display a serial number for reference. You can set recording intervals between 0 and 255 seconds or switch to manual recording by pressing STORE again.
What does the relative measurement function do?
The relative measurement feature allows you to measure values in comparison to a stored reference point, such as voltage or current. This is useful for comparing changes over time without needing absolute references.
How can I check continuity on a circuit?
To perform a continuity test, set the function switch to the green Ω CAP position and insert the leads into the COM and Ω jacks. Touch the probes across the circuit or wire you want to test. A beep indicates good continuity if resistance is below approximately 35 ohms.
To measure capacitance, set the function switch to the green Ω CAP position and insert the leads into the COM and Hz jacks. Touch the probes across the capacitor under test. The display will show the measured capacitance value.
Related products from RS Pro
RS-9660B
User manual 36 pages
RS-12
User manual 40 pages
RS-9935
User manual 40 pages
RS-8920
User manual 40 pages
IM-740
User manual 43 pages
RS-14
User manual 46 pages
RS-9519BT
User manual 48 pages
RS-9519BT
User manual 56 pages
RS-927A
User manual 50 pages
RS-9968BT
User manual 58 pages
RS-1150
User manual 84 pages