Velleman EVM892 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum voltage this meter can measure?
The DVM892 is a 600V CAT II digital multi-meter suitable for measuring voltages up to 600V. It is not suitable for voltages above 600V.
What safety precautions should I take when using this meter?
Always disconnect the test leads before opening the housing. Avoid measuring live circuits, and ensure the meter is in the correct range before connecting it to a test circuit. Do not measure currents in circuits with voltages exceeding 250V.
How do I measure voltage with this meter?
Connect the black test lead to the 'COM' jack and the red test lead to the 'V/ΩHz' jack. Select the appropriate voltage range (DC or AC) using the FUNCTION switch. Ensure the meter is set to the correct range before connecting it to the circuit.
How do I measure current with this meter?
For currents up to 200mA, connect the test leads to the 'mA/TEMP/CAP/hFE' jack. For currents up to 10A, use the '10A' jack. Always select the appropriate range and ensure the meter is disconnected from the circuit before changing ranges.
What is the maximum current this meter can measure?
The DVM892 can measure currents up to 10A. For continuous measurements, the meter can operate for a maximum of 10 seconds followed by a 15-minute break to avoid overheating.
How do I measure resistance with this meter?
Connect the black test lead to the 'COM' jack and the red test lead to the 'V/ΩHz' jack. Select the appropriate resistance range using the FUNCTION switch. Ensure the circuit is de-energized before taking measurements, and discharge any capacitors in the circuit.
What is the purpose of the '10A' jack?
The '10A' jack is used for measuring currents up to 10A. It is important to use this jack for higher current measurements and to ensure the meter is set to the correct range to avoid damage.
What should I do if the meter shows '1' during a measurement?
If the meter displays '1', it indicates that the measured value exceeds the selected range. Adjust the range to a higher setting and ensure the meter is properly connected to the circuit. For open circuits, the meter will also display '1'.
What is the battery type used in this meter?
The meter uses a 9V battery (6LF22). Always replace the battery when the display shows a low battery symbol. Do not use rechargeable batteries, and ensure the correct polarity is followed when inserting the battery.
What is the overvoltage category of this meter?
The DVM892 is rated for CAT II overvoltage category, which means it is suitable for measurements in normal domestic environments and for mono-phase appliances connected to the mains. It is not suitable for higher categories such as CAT III or IV.