Log in


or


google Continue with Google

Already have an account?

Cisco SG300-28P (72 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 1
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product description:

The Cisco SG300-28P is a 24-port Gigabit Ethernet switch with 4 additional 10/100/1000BASE-T ports, designed for small to medium-sized business networks. It supports advanced features such as Quality of Service (QoS), VLANs, and link aggregation, ensuring efficient data transmission and network management. The switch is equipped with Power over Ethernet (PoE) on all ports, allowing for the powering of IP phones, wireless access points, and other PoE-enabled devices. Its compact design and robust performance make it suitable for deployment in various network environments.

Frequently Asked Questions

How do I connect network devices to the Cisco 300 Series Managed Switch?

To connect network devices, first connect an Ethernet cable from a computer, printer, or other network device to the switch's Ethernet port. Then connect the other end of the cable to one of the numbered Ethernet ports on the switch. The LED on the port will light up if the device is active. For Gigabit connectivity, use Cat5 or better cables and ensure the maximum cabling distance does not exceed 100 meters.

What are the installation options for the Cisco 300 Series Managed Switch?

The Cisco 300 Series Managed Switch can be installed on a flat surface, mounted on a wall (only for 8-port models), or placed in a standard rack (1 rack unit high). Ensure the ambient temperature does not exceed 104°F (40°C), and keep both side panels unobstructed for proper airflow. Avoid mechanical overloading and ensure the device is level and secure.

How do I access the web-based interface of the Cisco 300 Series Managed Switch?

To access the web-based interface, you need the switch's IP address. By default, it is 192.168.1.254. Power on the switch and connect your computer to the same IP subnet. Open a web browser and enter the IP address. Log in with the default username 'cisco' and password 'cisco'. If you change the IP address, ensure you use the new address to access the interface.

What are the power requirements for the Cisco 300 Series Managed Switch?

The switch requires a power cord, and the power adapter is included with 8-port devices. Ensure the power outlet is not overloaded and that the switch is connected to a stable power source. Avoid using the switch in environments with high ambient temperatures or reduced airflow to prevent overheating.

How do I configure the Cisco 300 Series Managed Switch using the console port?

To configure the switch via the console port, connect a computer to the console port using the provided cable. Use a terminal program like HyperTerminal and configure it with the following settings: 115200 bits per second, 8 data bits, no parity, 1 stop bit, and no flow control. Log in with the default username 'cisco' and password 'cisco'. If this is your first login, change the password to secure the device.

What should I do if I cannot access the switch via the web-based interface?

If you cannot access the switch, check if the switch is powered on and ensure your computer is connected to the same IP subnet. Use the ping command to test connectivity to the switch's IP address. If there is no response, verify the IP address, check the Ethernet connection, and ensure there are no IP conflicts. If the issue persists, consult the troubleshooting section of the manual.

What are the power over Ethernet (PoE) capabilities of the Cisco 300 Series Managed Switch?

If your switch is a PoE model, it can deliver up to 15.4 Watts per PoE port to a powered device. This allows for powering devices like IP phones or wireless access points through the Ethernet cable. Ensure that the connected devices are compatible with PoE and that the cabling meets the required standards for power delivery.

How do I determine the current IP address of the Cisco 300 Series Managed Switch?

You can determine the current IP address of the switch by checking the system LED status or using the menu CLI through the console port interface. If the switch is using a static IP, ensure it is within the correct range. If it is using DHCP, verify that the DHCP server is functioning and that the switch can communicate with it.

What are the key features of the Cisco 300 Series Managed Switch ports and LEDs?

The switch has RJ-45 Ethernet ports for connecting network devices. MiniGBIC ports (if present) allow uplinking via optical fiber. Each port has an LED that indicates activity. The system LED lights when the switch is powered on and flashes during boot or IP address acquisition. The LINK/ACT LED indicates a connection and traffic activity on the port.

How do I ensure the Cisco 300 Series Managed Switch is properly ventilated?

Ensure that both side panels of the switch are unobstructed to allow proper airflow. Avoid placing the switch in areas with high ambient temperatures or restricted airflow. If mounting in a rack, load the rack from the bottom to the top with the heaviest devices at the bottom to prevent instability and overheating.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.