CTC SmartControl (124 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the CTC SmartControl Gateway used for?
The CTC SmartControl Gateway is the central unit of the system, capable of controlling up to seven optional CTC SmartControl accessories. It communicates with these accessories simultaneously and manages signals for temperature, humidity, and CO2 levels to optimize heating, hot water, and ventilation.
How often does the temperature sensor measure temperature?
The wireless temperature sensor measures temperature every 100 seconds by default. If the measured value changes by more than 2% from the previous measurement, the new value is sent to the gateway and displayed on the main unit's screen.
How do you install the CTC SmartControl Gateway?
Place the gateway on a flat surface on the main unit's insulation layer. Route the pre-installed connection cable (1.5 m) through the opening on the left side panel, connect it to the coupling box, and secure the cable inside. Attach the coupling box to the front panel using double-sided tape for better stability.
How do you connect the temperature sensor to the system?
The temperature sensor connects to the wireless network via the main unit's display. Follow the steps in the 'Define SmartControl Accessories' section of the Pekskärm menu to pair and configure the sensor with the gateway.
How do you install the temperature sensor in the home?
Place the temperature sensor in a suitable location in the home that represents the room's temperature, avoiding drafty areas or near heat sources. Ensure the solar cells receive daylight for charging. Secure the sensor to a flat wall surface and connect it to the system.
How do you pair the temperature sensor with the gateway?
To pair the temperature sensor with the gateway, select an available channel in the Define menu on the display, then press the 'Learn' button on the sensor. Follow the detailed instructions in the Pekskärm / Define SmartControl Accessories section for more information.
What is the purpose of the Multi-Button in CTC SmartControl?
The Multi-Button is a wireless transmitter that sends a radio signal when pressed in mode A or B. It can be used for specific remote control functions, such as reducing ventilation during fireplace use or when leaving the home for an extended period.
How do you install the Multi-Button?
Attach the Multi-Button to a flat surface using double-sided tape or screw it into place. Remove the bottom plate by gently prying it off with a screwdriver, secure the plate to a flat wall, and then reattach the button to the plate.
How do you pair the Multi-Button with the system?
To pair the Multi-Button with the system, select the connection channel in the Define menu on the display and press the button (mode A or B). For detailed instructions, refer to the Pekskärm / Define SmartControl Accessories section of the manual.
What is the purpose of the Repeater in CTC SmartControl?
The Repeater is used to retransmit and strengthen the signal between SmartControl accessories (sensors or buttons) and the gateway. It is particularly useful if an accessory is placed far from the gateway or if thick walls block the signal. The repeater connects to a wall outlet via the included power adapter.