Heraeus UT6200 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum number of ovens that can be stacked?
The maximum number of ovens that can be stacked is two on top of each other and two side by side. A minimum wall clearance of 150 mm is required between stacks, and a clearance of 25 mm must be maintained between stacks.
What safety precautions are required for installation?
The ovens must be installed in a location with sufficient clearance from walls and ceilings to ensure proper airflow and prevent overheating. For safety, the ovens must not be used for drying or heating operations involving flammable vapors or hazardous dusts. The installation must also comply with the requirements of DIN 12 880 and VDE 0700.
How should the oven be secured after placement?
For models 6420 and 6760, the front casters must be moved forward after placing the oven, and the locking levers must be pressed down. This ensures the required stand safety. When moving the oven, make sure the doors are closed to prevent accidents.
What is the minimum operating temperature for the ovens?
The minimum operating temperature for T-series ovens is the room temperature plus 5°C, while for UT-series ovens, it is the room temperature plus 20°C. Avoid placing the oven in cold air currents, and ensure the ambient temperature does not exceed 35°C.
How is the temperature recorded in the oven?
The oven includes a circular chart recorder that records temperature data without requiring ink or a color ribbon. The recording is done by periodic contact of a sharp pointer with a sensitive diagram disc. The system is maintenance-free except for replacing the diagram disc.
What are the requirements for the ventilation system?
A ventilation system must be installed to remove any harmful or corrosive vapors and gases generated during heating. Use a temperature-resistant and corrosion-resistant exhaust duct connected to the exhaust ports. If multiple ovens are connected to a central exhaust system, install a draft breaker to prevent backdrafting.
Can the oven be installed in a laboratory table?
Ovens without a fan (models T 6060 and T 6120) can be installed in laboratory tables, but only if the tables are made of non-combustible materials according to DIN 4102. Ensure a minimum clearance of 25 mm from the sides and ceiling when installing.
What is the purpose of the adjustable air dampers?
The adjustable air dampers allow control of the airflow within the oven, which is essential for maintaining the correct temperature and ensuring even heat distribution. Proper adjustment of the dampers helps optimize the performance and safety of the oven.
What is the recommended clearance between the oven and the wall?
A minimum clearance of 25 mm must be maintained between the oven and the wall to prevent overheating and ensure proper airflow. For models 6030, 6420, and 6760, a ceiling clearance of 200 mm is required.
How should the oven be grounded?
The oven is equipped with a fixed power cable with a 16 A Schutzkontakt plug. Ensure the power supply matches the specifications on the nameplate. The installation must comply with VDE standards and local electrical supply regulations.