DFI AK76-SN (69 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to set the CPU frequency ratio?
To set the CPU frequency ratio, use the SW1 jumper. The default setting is Auto, which lets the system run according to the CPU's default ratio. If you choose Manual, use pins 1, 2, 3, and 4 to select the desired ratio. For example, setting pins 1 and 2 to On sets the ratio to 5x.
How to set the CPU core voltage?
To set the CPU core voltage, use the SW2 jumper. The default setting is Auto, which lets the system run according to the CPU's default core voltage. If you choose Manual, use pins 1, 2, 3, and 4 to select the desired core voltage. For example, setting pin 1 to On sets the voltage to 1.500V.
What are the options for the CPU front side bus?
The CPU front side bus can be set using the JP2, JP3, and JP4 jumpers. Setting pins 1-2 to On configures the bus for a 133MHz (266MHz DDR) CPU. Setting pins 2-3 to On configures it for a 100MHz (200MHz DDR) CPU, which is the default setting.
How to clear CMOS data?
To clear CMOS data, use the JP1 jumper. Set pins 1-2 to On to clear the CMOS data. Setting pins 2-3 to On returns the system to the default configuration, which is the normal mode.
What are the PS/2 ports used for?
The PS/2 ports are used to connect a mouse and keyboard. Ensure your computer is turned off before connecting or disconnecting these devices to avoid damaging the system board.
How are the USB ports connected?
The USB ports are connected using a specific pinout configuration. Each port has pins for VCC (power), Ground (ground), and data lines. The exact pin configuration varies depending on the USB version (USB 1, USB 2, USB 3, USB 4) and the specific port.
What is the purpose of the jumpers on the system board?
The jumpers on the system board are used to configure various settings such as CPU frequency ratio, core voltage, front side bus speed, and CMOS data clearing. They provide a way to manually adjust these parameters without using the BIOS setup utility.
What safety precautions should be taken when working with the system board?
To avoid damage to the system, use the correct AC input voltage range. Unplug the power cord before removing the system chassis for installation or servicing. Replace batteries only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
What are the FCC and DOC compliance statements for this equipment?
This equipment has been tested and found to comply with the limits for a Class B digital device, as per Part 15 of the FCC rules. It may cause harmful interference to radio or television reception if not installed and used properly. If interference occurs, try reorienting the receiving antenna, increasing the separation between the equipment and the receiver, or using a different circuit.
What are the system board layout and components?
The system board layout includes various components such as the CPU, memory slots, expansion slots, and connectors. The layout is detailed in the manual, showing the positions of jumpers, ports, and connectors for easy reference during installation and configuration.
Related products from DFI
K6XV3+
User manual 34 pages
P2XBL/e
User manual 35 pages
CB60-V3
User manual 41 pages
K6BV3+
User manual 43 pages
K6BV3+/66
User manual 44 pages
K6BV3+/66
User manual 44 pages
K6XV3+/66
User manual 44 pages
PA61
User manual 51 pages
CA61
User manual 55 pages
CA63-SC
User manual 55 pages
CA33-SC
User manual 57 pages
CA33-SC
User manual 57 pages
CA63-EC
User manual 78 pages
CS61-EC
User manual 84 pages
CS61-EN
User manual 84 pages
CA64-EN
User manual 86 pages
NB76-TL
User manual 88 pages
CA64-TC
User manual 88 pages
NB76-TC
User manual 88 pages
CD70-SC
User manual 89 pages