Log in


or


google Continue with Google

Already have an account?

U.S. Robotics 802.11g Wireless Turbo Multi-function Access Point (134 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 5
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product description:

The U.S. Robotics 802.11g Wireless Turbo Multi-function Access Point is a networking device designed for wireless communication. It supports the 802.11g standard, enabling high-speed data transfer over wireless networks. The device functions as an access point, allowing multiple devices to connect to a network simultaneously. It features turbo mode for enhanced performance and improved signal range. The access point is suitable for use in home and small office environments, providing reliable and stable wireless connectivity.

Frequently Asked Questions

How do I install the 802.11g Wireless Turbo PC Card?

To install the 802.11g Wireless Turbo PC Card, first insert the U.S. Robotics Installation CD-ROM into your CD-ROM drive. If it does not launch automatically, navigate to the Run dialog and type D:\setup.exe. Follow the on-screen instructions to install the software and drivers. Once installed, insert the PC Card into an available slot on your laptop and ensure it is fully inserted. Windows will detect the new hardware and prompt you to complete the installation.

What should I do if my laptop does not recognize the PC Card?

If your laptop does not recognize the 802.11g Wireless Turbo PC Card, ensure it is fully inserted into the PC Card slot. If the issue persists, check that the card is properly installed and that the software is correctly installed. If the problem continues, try uninstalling and reinstalling the card, or consult the troubleshooting section of the manual.

How do I configure the 802.11g Wireless Turbo PC Card for a wireless network?

To configure the card, use the Configuration Utility to set the correct mode (Adhoc or Infrastructure) depending on your network setup. Ensure that the card is set to the same radio channel as other devices in the network. If connecting to an Access Point, verify that the correct SSID, authentication mode, and WEP encryption key are used.

What should I do if I cannot connect to the wireless network?

If you are unable to connect to the wireless network, check that the card is set to Infrastructure mode if connecting to an Access Point. Ensure that the Access Point is broadcasting the correct SSID and that the correct authentication mode and WEP key are used. Also, verify that the card is properly installed and that the Wireless Configuration Utility is running.

How do I enable file and print sharing over the wireless network?

To enable file and print sharing, go to the Network settings in Windows and enable File and Print Sharing. For Windows 98 and Me, navigate to Control Panel > Network and select the appropriate options. For Windows 2000 and XP, file and print sharing is automatically enabled in Administrator mode. Ensure that all devices are on the same network and have unique IP addresses.

How do I enable Internet sharing over the wireless network?

To enable Internet sharing, configure the network settings to allow sharing. For Windows 98, use the Internet Connection Sharing Wizard to create a configuration disk. For Windows 2000, ensure two network adapters or one adapter and one modem are installed, and enable sharing through the Network and Dial-up Connections settings. For Windows Me, use the Home Networking Wizard to set up the connection.

What should I do if I receive an IP address conflict message?

If you receive an IP address conflict message, ensure that each device on the network has a unique IP address and name. Refer to your computer's documentation to change the IP address or name. Ensure that all devices are on the same network and that the correct subnet mask is used.

How do I troubleshoot poor wireless link quality?

If you experience poor link quality, reposition the 802.11g Wireless Turbo PC Card to reduce interference from walls, floors, or other obstacles. Ensure that the card is positioned close to the Access Point. Check the physical connections between the Access Point and your modem, router, or switch. Also, verify that the card is set to the correct radio channel.

How do I reset the 802.11g Wireless Turbo PC Card settings?

To reset the card, remove and reinsert the Installation CD-ROM and restart the installation process. If the issue persists, reset all wireless Access Points and network adapters to their default settings. Ensure that the Wireless Configuration Utility is running and that the card is properly detected.

How can I contact U.S. Robotics technical support?

For technical support, visit the U.S. Robotics website at http://www.usr.com or call the support number for your country. Support hours are typically from 9:00 A.M. to 5:00 P.M., Monday through Friday, CST. For online support, use the email support options provided on the website.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.