Asus V-P5G43 (100 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install a CPU?
To install a CPU, locate the CPU socket on the motherboard. Press the load lever with your thumb, then move it to the left until it is released from the retention tab. Lift the load lever to a 135º angle, then lift the load plate to a 100º angle and push the retention cap from the load plate window to remove. Position the CPU over the socket, ensuring the gold triangle is on the bottom-left corner, and fit the socket alignment key into the CPU notch. Close the load plate and push the load lever until it snaps into the retention tab.
How do I install an AMD CPU?
To install an AMD CPU, locate the CPU socket and lift the socket lever to a 90º angle. Install the CPU on the socket, ensuring the corner with the gold triangle matches the socket corner with a small triangle. Push down the socket lever to secure the CPU. Incorrect installation may bend the pins and severely damage the CPU.
How do I install a CPU fan and heatsink?
For an Intel® Pentium® 4 CPU, place the heatsink on top of the installed CPU, ensuring the four fasteners match the holes on the motherboard. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly. Connect the CPU fan cable to the motherboard connector. For an AMD CPU, ensure the fan and heatsink assembly perfectly fits the retention mechanism module base, attach the retention bracket, and connect the fan cable to the motherboard.
How do I install a DIMM?
To install a DIMM, locate the DIMM sockets on the motherboard. Unlock a DIMM socket by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. Push the DIMM to the socket until the retaining clips snap inward. Always unplug the power supply before adding or removing DIMMs to avoid damaging the motherboard or components.
How do I install an expansion card?
To install an expansion card, remove the metal cover opposite the slot you intend to use. Remove the metal bracket loc. Insert the card connector into the slot and press the card firmly until it fits in place. Replace the metal bracket loc. Ensure the card is securely seated and the bracket is properly attached.
How do I install an optical drive?
To install an optical drive, place the chassis upright and remove the upper 5.25-inch drive bay metal plate cover. Insert the optical drive into the bay and carefully push it until its screw holes align with the holes on the bay. Secure the optical drive with two screws on both sides of the bay. Connect the IDE and power plugs to the connectors at the back of the drive.
How do I install a floppy disk drive?
To install a floppy disk drive, place the chassis upright and remove the upper 3.5-inch drive bay metal plate cover. Insert the floppy disk drive into the bay and carefully push it until its screw holes align with the holes on the bay. Secure the floppy disk drive with two screws on both sides of the bay. Connect the signal and power plugs to the connectors at the back of the drive.
How do I install a hard disk drive?
To install a hard disk drive, remove the 3.5-inch hard drive holder from the chassis. Insert the hard disk drive into the holder and carefully push it until its screw holes align with the holes on the holder. Secure the hard disk drive with two screws on both sides of the bay. Replace the hard drive holder in the chassis and secure the screws. For SATA HDD, connect the SATA signal and power plugs to the connectors at the back of the drive. For IDE HDD, connect the IDE and power plugs to the connectors at the back of the drive.
How do I select the correct voltage for the power supply?
The system’s power supply unit has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area. If the voltage supply is 100-127 V, set the switch to 115 V. If the voltage supply is 200-240 V, set the switch to 230 V. Refer to the system User Guide for the exact location of the voltage selector.
How do I reinstall the front panel assembly and side cover?
To reinstall the front panel assembly and side cover, insert the front panel assembly hinge-like tabs into the holes on the right side of the chassis. Swing the front panel assembly to the left and insert the hooks into the chassis until the front panel assembly fits in place. Insert the six side cover hooks into the chassis tab holes. Push the side cover toward the front panel until it fits in place and secure it with two screws you removed earlier.
Related products from Asus
BM2CF
User manual 2 pages
BP1CE
User manual 2 pages
D620SF
User manual 2 pages
BM3CD
User manual 2 pages
BP1CD
User manual 2 pages
D520MT
User manual 2 pages
D521MT
User manual 2 pages
MD330
User manual 2 pages
SD330
User manual 2 pages
D820SF
User manual 2 pages
SD580
User manual 2 pages
BM2AD
User manual 2 pages
D510MT
User manual 2 pages
D310MT
User manual 2 pages
MD310
User manual 2 pages
SD310
User manual 2 pages
Chromebit CS10
User manual 32 pages
P1-P5945G
User manual 80 pages
Pundit P1-PH1
User manual 80 pages
Pundit P3-AE5
User manual 80 pages