Pentair MAGICSTREAM LAMINAR (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How high can the Laminar arc reach?
The Laminar arc can reach a maximum height of 2 meters. To achieve this height, a water supply of 38 liters per minute with 5 meters of head is required.
What is the recommended water supply for the Laminar?
The Laminar requires a water supply of 38 liters per minute with 5 meters of head (measured at the Laminar) to achieve the maximum arc height.
How should the Laminar be installed to minimize water splashing?
Install the Laminar close to the edge of the pool to minimize water from splashing on the deck on windy days, ensuring safety and reducing water loss.
What type of filter is recommended for the Laminar?
It is advised to install the Laminar with a Clean & Clear™ Cartridge Filter or a sand filter with ClearPro Technology® to supply clean, filtered water to the Laminar.
What type of pipe should be used for the Laminar?
Use 32mm PVC pipe to supply the Laminar. On long pipe runs, calculate the pressure drop and compensate by increasing the supply pressure to maintain optimal performance.
What valves should be installed for the Laminar?
Install a 32mm ball or globe throttling valve on the water supply to each Laminar. When installing multiple Laminars, Pentair recommends installing a throttling valve on the main supply manifold for better control.
How should the deck housing be installed?
The deck housing should be installed so that the water supply and electrical connections are located opposite the intended direction of the Laminar stream. The housing cover collar should be angled to align flush with the finished deck surface.
What is the maximum pressure allowed for the Laminar?
The pressure on the piping or plumbing supplying the Laminar should not exceed 3.5 BAR to prevent damage and ensure safe operation.
How should the Laminar be connected to the supply pipe?
Connect the Laminar to the supply pipe using a union connection. Ensure the o-ring stays in its groove and the connection surface is clean and free of glue or dirt for a secure fit.
How can the light intensity of the Laminar be adjusted?
The light intensity can be adjusted using the light enhancer, which controls the amount of small bubbles added to the stream. The control screw for the light enhancer is located on the Laminar orifice plate, allowing for customization of the lighting effect.