Gemü 1436 cPosProfibus DP (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum baud rate for Profibus DP?
The maximum baud rate supported by the GEMÜ 1436 cPos with Profibus DP is 12 MBaud.
How many digital outputs are available on the device?
The GEMÜ 1436 cPos provides three digital outputs that can be controlled via the Profibus interface.
What is the function of the NoInit parameter?
NoInit allows manual opening and closing of a valve before it has been initialized, but if initiated after initialization, an external diagnostic error with code 0x42 will be generated.
How does the device handle excessive setpoint values?
If the setpoint value exceeds the allowed range (e.g., 0x11), an external diagnostic error is triggered to alert of invalid input.
What happens when a parameter outside its valid range is attempted to be changed?
An external diagnostic error with code 0x21 will be generated if the value exceeds the maximum allowed, and code 0x20 for values below minimum.
How does the device handle missing air supply in pneumatic systems?
A fault message 'Air Missing' is triggered when a loss of compressed air is detected during operation, indicating an issue with the pneumatic system.
What are the available functions for valve actuation via Profibus DP?
The device supports various functions such as opening and closing valves slowly or quickly, holding position, using PWM control, and stopping ongoing actions through specific commands like 'Q' (Quit).
How is the error list cleared on this device?
To clear the error list, use command 0x51 ('Clear Error List'), which removes all entries from the fault log and resets the system status.
What does a 'Bus Fault' diagnostic code indicate?
A Bus Fault indicates an issue with communication on the Profibus network, such as cable breaks or short circuits in sensor connections. It is detected through error codes like 0x28.
How can you read and interpret fault messages from the device?
Use command 'E' (Error List) to retrieve detailed information about active faults, including their descriptions such as 'PotWrongDir', which indicates a wrong direction of movement in potentiometer calibration.