Gallagher M200 (74 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum distance between earth stakes for the M150, M300, and M500?
The earth stakes for the M150, M300, and M500 should be spaced at least 3 meters (10 feet) apart. Use a minimum of 3 earth stakes for these models.
How do I connect the energizer to the earth system?
To connect the energizer to the earth system, use an underground cable (G6270) and remove 5cm (2") of plastic coating from one end. Connect this to the green terminal on the energizer. Attach the cable to the earth system by removing 10cm (4") of insulation from each earth stake (G8790) and clamp the exposed wire to each stake using an earth clamp (G8760).
What should I do if the energizer is not working properly?
If the energizer is not working properly, check the power supply, inspect the supply cord and energizer for any damage, and ensure the earth system is correctly connected. If the issue persists, refer servicing to a Gallagher Authorised Service Centre.
What is the recommended depth for the earth electrode?
The energizer earth electrode should penetrate the ground to a depth of at least 1 meter (3 feet). It should also be at least 10 meters (33 feet) away from any power, telecommunications, or other systems.
How do I install the fence wiring to avoid interference with power lines?
Install fence wiring well away from any telephone or telegraph line or radio aerial. If the fence crosses a public pathway, incorporate a non-electrified gate or provide a crossing by means of steps. Ensure warning signs are placed at all such crossings.
What is the minimum clearance required between electric fence wires and overhead power lines?
The minimum clearance between electric fence wires and overhead power lines depends on the voltage of the power line. For power lines operating at a nominal voltage not exceeding 1,000 V, the clearance should be 2 meters. For power lines operating at a nominal voltage exceeding 1,000 V, the clearance should be 15 meters.
What should I do if the energizer has a standby mode?
Energizers with a standby mode may turn on or off without warning. If the energizer needs to be rendered fully inoperative, it must be disconnected from the mains supply to ensure safety.
What is the purpose of the output voltage bargraph on the energizer?
The output voltage bargraph provides a quick indication of the fence performance. Green segments indicate the fence is performing well, yellow segments indicate some load but still effective shock, and red segments indicate heavy load requiring maintenance.
How should I install the energizer to ensure safety?
Install the energizer in a sheltered location, away from heat sources and moisture. Ensure it is fully protected from rain, condensation, and other sources of moisture. Avoid placing it near combustible materials and ensure it has adequate ventilation.
What should I do if I need to maintain the fence?
During fence maintenance, use cut-out switches (G6076) to switch off sections of the fence system. Ensure the energizer is disconnected from the mains supply before performing any maintenance work to avoid electrical hazards.
Related products from Gallagher
S80 Lithium
User manual 8 pages
033515
User manual 8 pages
S60 Lithium
User manual 8 pages
004171
User manual 8 pages
S100
User manual 84 pages
S17
User manual 12 pages
S17
User manual 28 pages
S40
User manual 40 pages
S40
User manual 68 pages
S40
User manual 84 pages
S16
User manual 78 pages
S400
User manual 98 pages
G503014
User manual 20 pages
MB1800i
User manual 86 pages
MB1800i
User manual 162 pages
MB2800i
User manual 86 pages
MB2800i
User manual 162 pages
S22
User manual 28 pages
B60
User manual 40 pages
S20
User manual 40 pages