Proxxon 28472 (90 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to fold the picture pages when reading the manual?
When reading the user instructions, fold out the picture pages to ensure clear visibility of the illustrations and diagrams.
What is the maximum allowable speed for the tool attachment?
The maximum allowable speed for the tool attachment must not exceed the rated maximum speed specified for the tool to prevent breakage and ensure safe operation.
What are the technical specifications of the FBS 240/E?
The FBS 240/E has a motor speed range of 5,000 to 22,000 RPM, operates on ~230 V, 50/60 Hz, consumes 100 W of power, and has a noise level of ≤ 70 dB(A). Vibration at the handle is ≤ 2.5 m/s².
How to secure the workpiece during operation?
Secure the workpiece during operation using a vise or suitable clamping device to ensure safety and prevent the workpiece from flying loose, which could cause injury.
What is the recommended way to hold the tool for fine work?
For fine work, hold the tool like a ballpoint pen to maintain control and avoid blocking the cooling vents, which helps in maintaining optimal performance and preventing overheating.
What should be done if excessive vibration is detected?
If excessive vibration is detected, stop the operation immediately. Excessive vibration may indicate improper tool use or wear, and continued use could lead to equipment damage or injury.
How to change the tool attachment?
To change the tool attachment, rotate the collet (2) slightly while pressing the locking knob (1) until it clicks into place. Open the collet and replace the tool attachment with the new one.
What type of tool attachments are recommended for optimal performance?
For optimal performance, use PROXXON steel collets, which provide precise and secure holding of the tool attachments, ensuring accurate and efficient operation.
What should be done if the tool attachment becomes damaged?
Do not use damaged, bent, or worn-out tool attachments. These can break during operation, leading to potential injuries. Always ensure the tool attachments are in good condition before use.
How to maintain and clean the tool?
After each use, clean the tool with a soft cloth or brush. Use mild soap or a suitable cleaning agent. Avoid solvents or alcohol-based cleaners, as they can damage the plastic housing.
Related products from Proxxon
BBS/S
User manual 42 pages
OZI/E
User manual 50 pages
MICROMOT MSG
User manual 56 pages
BS/E
User manual 46 pages
PS 13
User manual 38 pages
PS 13
User manual 42 pages
PS 13
User manual 50 pages
LB/E
User manual 38 pages
ofv
User manual 42 pages
LHW
User manual 78 pages
LHW
User manual 54 pages
MICROCUTTER MIC
User manual 55 pages
MICROCUTTER MIC
User manual 58 pages
FF 500
User manual 60 pages
FF 500
User manual 64 pages
MOF
User manual 60 pages
MOF
User manual 70 pages
28568
User manual 60 pages
WAS/E
User manual 66 pages
24350
User manual 68 pages