Cisco Linksys WPSM54G (245 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I access the PrintServer utility?
To access the PrintServer utility, you can either double-click the PrintServer icon in the system tray or use the program icon accessed through the Start menu. The utility allows you to connect to the printer for scans, faxes, or memory card usage.
What is the purpose of the Reset button?
The Reset button is used to restore the PrintServer to its factory default settings or to print a test page. Holding it down for ten seconds will reset the device, which deletes all custom settings and replaces them with factory defaults.
How do I print a test page?
To print a test page, ensure both the PrintServer and the connected printer are powered on. Press and hold the Reset button for two seconds. The test page will be printed, listing the current settings of the PrintServer. Note that PostScript printers cannot print this test page.
What does the Wireless LED indicate?
The Wireless LED lights up green when there is a wireless connection and flashes when the PrintServer is sending or receiving data over the wireless network. A red LED indicates the printer is not available, and you should refer to the troubleshooting section for assistance.
How do I access the web-based utility?
To access the web-based utility, open your web browser and enter the PrintServer’s IP address in the Address field. If you don’t know the IP address, double-click the PrintServer Utility icon to view it on the Print Server Information screen. Then press Enter to load the utility.
What is the default password for the PrintServer?
The default password for the PrintServer is 'admin'. When accessing the web-based utility, leave the User name field blank and enter the password you set during the Setup Wizard. Click OK to proceed.
How do I configure the TCP/IP settings?
To configure the TCP/IP settings, click the TCP/IP tab in the web-based utility. You can choose to obtain an IP address automatically via DHCP or assign a fixed IP address. Ensure the IP address and subnet mask are appropriate for your network.
What is the purpose of the SNMP settings?
The SNMP settings allow network administrators to monitor and control the PrintServer using network management platforms like HP OpenView. You can configure access levels, trap receivers, and community names for SNMP communication.
How do I set up the wireless settings?
To set up the wireless settings, navigate to the Wireless > Basic tab in the web-based utility. You can configure the SSID (network name), channel, and regulatory domain. The SSID is case-sensitive and should have 32 or fewer characters.
What should I do if the PrintServer is not responding?
If the PrintServer is not responding, check the LED indicators for error signals. If the Power LED is orange, there may be an error. If the Wireless LED is red, the printer may not be available. Refer to Appendix A: Troubleshooting for detailed steps to resolve the issue.