Labelmate MC-11 (65 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum label roll weight?
The MC-11 and MC-11+ rewinders support a maximum label roll weight of 3 kilograms. This ensures safe and efficient operation for a wide range of label applications.
How do I set up the rewinder?
To set up the rewinder, position it so the rewind fingers are perpendicular to the label web. Ensure the power switch is off, connect the power supply, and adjust the direction switch as needed for your operation.
What is the maximum label width?
The maximum label width supported by the MC-11 and MC-11+ rewinders is 125 millimeters. This allows compatibility with a variety of label sizes and formats.
How do I secure the label web to the core?
After placing the cardboard core on the rewinder, pull the label web onto the core and use tape to secure it. This ensures the labels remain properly aligned during the rewinding process.
What safety precautions should I follow?
Always ensure all power sources are turned off when not in use. Wear appropriate personal protective equipment, avoid loose clothing, and stay alert while operating the rewinder to prevent accidents.
Can the rewinder be controlled externally?
Yes, the MC-11+ model includes an external control interface that allows direct control from a barcode printer. This feature supports various signal types and is compatible with specific printer models.
What is the maximum roll diameter?
The MC-11 and MC-11+ rewinders support a maximum roll diameter of 220 millimeters. This allows for the rewinding of larger label rolls without compromising performance.
How do I adjust the rewind speed?
The rewind speed can be adjusted using the potentiometer located on the upper part of the machine. This allows you to fine-tune the rewind force according to your specific needs.
What is the power supply requirement?
The MC-11 and MC-11+ rewinders require a power supply of 220-240VAC at 50-60Hz, with an output of 15VDC. Ensure the power source is properly grounded for safe operation.
How do I lock the core fingers?
To lock the core fingers, rotate the flange plates in opposite directions until the fingers are tight against the core. Then, move the locking levers to the LOCK position to secure the core in place.
Related products from Labelmate
UNI-CAT-CHUCK
User manual 54 pages
UNI-CAT-1-INCH
User manual 54 pages
UNI-CAT-10-INCHES
User manual 54 pages
UNI-CAT-ACH
User manual 54 pages
LD-300-UNI
User manual 60 pages
MC-10
User manual 60 pages
UCAT-S
User manual 61 pages
CAT-40G
User manual 62 pages
LMR057
User manual 62 pages
ZCAT-10
User manual 62 pages
LMR060
User manual 62 pages
ZCAT-6
User manual 62 pages
TWIN-MATRIX -6-DELUXE-STATION
User manual 62 pages
TWIN-MATRIX -8-DELUXE-STATION
User manual 62 pages
ZCAT-8
User manual 62 pages
TWIN-MATRIX-6-L/R
User manual 62 pages
TWIN-MATRIX-8-R/L
User manual 62 pages
TWIN-MATRIX-6-R/L
User manual 62 pages
LMR058
User manual 62 pages
LMR059
User manual 62 pages