Avery Dennison Monarch 9906 (144 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I connect the power cable?
Plug the power cable into the socket and the other end into a grounded electrical outlet. The power supply automatically switches between 115V and 230V.
How do I connect the communications cable?
Connect the communications cable into the appropriate port. Turn on the printer by pressing ( I ) and turn it off by pressing ( O ).
How do I load labels or tags?
Open the cover, unlock the printhead by turning the retaining latch, lift the printhead assembly using the printhead tab, place the roll of supply on the supply holder, adjust the supply holder guide so it barely touches the roll, and push up on the supply lever to lock it into place.
How do I load the ribbon?
Open the cover, unlock the printhead, lift the printhead assembly, slide the extra ribbon core onto the take-up reel, remove the new ribbon from the package, slide the ribbon onto the back reel, feed the ribbon under both ribbon rollers and printhead, and tape the ribbon to the take-up core.
How do I clean the printhead?
Turn off the printer, open the cover and printhead assembly, remove the label roll and ribbon, spray the supply path with compressed air, use a CLEAN-STRIP to clean the platen roller, peel bar, sensor, and printhead, let the printer dry, and then reload supplies.
How do I adjust the printhead pressure dials?
The default setting is least pressure, which provides optimal printing in most cases. If you see smudging, ribbon wrinkling, or poor print quality, adjust the dials using a coin or flathead screwdriver. The inside dial should be equal to or more pressure than the outside dial.
How do I select the interpreter?
From the Main Menu, select Setup, then press or until Interpreter is on the display. Press CHANGE, then press until Easy-Plug is on the display. Press SET to save the change. The printer reboots automatically after selecting an interpreter.
What are the RFID setup options?
Use the RFID Setup Menu to read a tag, set the RF Power, and clear data. The Read Tag menu item lets you read the EPC data programmed into an RFID tag. Refer to the RFID Web Setup Utility to set the RF Power setting. The printer stores the number of successful and failed programmed tags, which can be cleared using the Clear Data menu item.
What should I do if the printer does not print?
Check the supply and ribbon, send a corrected format and batch packet. Ensure the printhead is properly locked and the supply guide is adjusted correctly. If the issue persists, consult the Operator’s Handbook for further troubleshooting steps.
What should I do if the printer does not feed?
Adjust the printhead pressure dials. Ensure the supply guide is properly aligned and the supply roll is turning freely. If the issue persists, check the ribbon and supply for damage or misalignment.