Dell S520 (132 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How high should the projector screen be mounted?
To determine the desired height, measure from the floor to the top of the image. Mark the location 4-1/16 inches above this height and 4 inches to the right of the screen's center for accurate installation.
What tools are required for installation?
You will need a 1/8 in. (wood), 1/2 in. (drywall), 8 mm (concrete), 6 mm (concrete – AF6 toggler) drill bits, a 7/16” wrench, a #2 Phillips Screwdriver, a carpenter’s level, a ruler, and various screws and anchors as specified in the manual.
What is the maximum drywall thickness for installation?
The wall to which the screen/whiteboard is being attached may have a maximum drywall thickness of 5/8” (1.6cm) for wood stud installation, and 1/2” (1.3cm) minimum for steel stud installation.
How do I secure the screen brackets to the wall?
For wood or steel studs, use (3) supplied #8 x 1” screws. For concrete walls or no studs, use (3) supplied #8-10 wall anchors and (3) supplied #8 x 1” screws to secure the screen brackets.
How do I mount the projector?
Install the projector mount using the S520 Dual Stud Wall Mount (MSP-DCCUST2) manual. Do not install the plastic covers for the mount, and route cables through the wall bracket and cover to the projector location.
How do I secure the marker tray?
Attach the marker tray to the right side of the screen frame using (2) supplied #8 x 1/2” screws into the side channel. For wall mounting, use (1) #8 x 1” screw for wood/steel studs or (1) wall anchor and screw for concrete or no studs.
How do I install the IR sensor bar?
Slide the IR sensor bar onto the metal bracket and insert the safety screw through the sensor bar into the bracket. This ensures secure attachment and proper functionality.
How do I attach the sensor cover?
Snap the sensor cover clips over the screen frame and secure it by screwing down into the upper channel of the screen frame using the supplied #8 x 3/4” screw.
How do I install cable clips for cable management?
Mount cable clips on the wall between the projector mount and IR sensor cover. For wood studs, use (4) supplied #8 x 1” screws. For concrete or no studs, use (4) wall anchors and screws. Route cables behind the clips and attach the cable cover.
What safety precautions should I follow during installation?
Ensure the structure can support five times the combined weight of all equipment. Reinforce the wall as needed. Avoid using the screen/whiteboard outdoors and only for its intended use. Always follow the safety instructions to prevent injury or equipment damage.