Plus U2-811 (218 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I replace the lamp?
Replace the lamp when the Status indicator lights or flashes. If you continue to use the lamp after 1000 hours of usage, the lamp will turn off. Follow the instructions in the manual for replacing the lamp cartridge.
What are the power supply requirements?
The unit is designed to operate on a power supply of 100 to 120 and 220 to 240 V 50/60 Hz AC. Ensure that your power supply fits these requirements before attempting to use the unit.
How do I clean the unit?
Disconnect the power cable from the unit. Clean the cabinet periodically with a damp cloth. Use a blower or lens paper to clean the lens. Clean the ventilation slots and speaker grills using a vacuum cleaner with a soft brush attachment. Avoid using strong detergents or solvents.
What should I do if the unit overheats?
Ensure there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit and walls. If accumulated dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction.
How do I adjust the projected image?
Adjust the projected image from the computer by using the keystone correction function. This allows you to correct image distortion when projecting above or under the height of the line of vision. Refer to the manual for detailed instructions on adjusting the image.
What are the safety precautions for the unit?
Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside the unit. Do not place any liquids on top of the unit. Do not look into the lens while the unit is on. Avoid exposing the unit to moisture, dust, or smoke. Handle the unit carefully to prevent damage from drops or shocks.
How do I use the remote control as a computer mouse?
The remote control can be used as a wireless mouse control to operate the PC or Macintosh connected to the unit. Ensure that the remote control is within the effective range of the unit, which is 50 degrees horizontally and 30 degrees vertically relative to a line perpendicular to the remote sensor. Refer to the manual for detailed instructions on using the remote control as a mouse.
What are the specifications of the unit?
The U2-1130 has a brightness of 1300 ANSI lumens, the U2-1110 has 1100 ANSI lumens, and the U2-811 has 1100 ANSI lumens. All models are compatible with various color systems including NTSC, PAL, SECAM, and NTSC4.43. The unit supports SXGA and XGA resolutions with advanced intelligent compression technology for clear image reproduction.
How do I reset the unit to factory settings?
To reset the unit to factory settings, follow the instructions in the manual. This process will restore the unit to its original configuration and may erase any custom settings you have made. Ensure that you have saved any important data before performing a factory reset.
What should I do if the unit is not working properly?
If the unit is not working properly, refer to the troubleshooting section in the manual. Check for common issues such as power supply problems, incorrect connections, or software malfunctions. If the issue persists, contact a qualified PLUS service personnel for further assistance.