ABS ROBUSTA 1 (28 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the applications for ROBUSTA pumps?
ROBUSTA pumps are suitable for pumping clear water, rainwater, and wastewater with a maximum solids content of 0.5%. They should not be used for fecal matter, flammable or explosive liquids, or liquids containing gases.
How does the automatic level control work?
The TS version includes an automatic level control that switches the pump on and off at pre-set levels. The lowest switching point ensures the pump turns off before it starts to suck air. The KS version uses a ball-type automatic level control.
What should be done before cleaning the inlet screen?
Before cleaning, ensure the pump is fully disconnected from the mains and cannot be inadvertently switched on. If there are leaves or fibrous materials in the medium, clean the inlet screen regularly.
How to clean the level control on a TS version?
For the TS version, withdraw the float housing to the right, remove the float, clean all parts, and replace it with the rounded edges facing inward. Reinstall the float housing and ensure the switch is in the lower position before testing.
What are the safety precautions for using ROBUSTA pumps?
ROBUSTA pumps with Protection Type 1 must be earthed properly. They should not be used in swimming pools or ponds unless equipped with a 30mA earth leakage circuit breaker. Always follow safety regulations and ensure qualified personnel handle maintenance and installation.
What should be done if the pump is exposed to freezing temperatures?
If air temperatures are below 0°C, the pump must be run continuously or remain submerged to avoid freezing. If the liquid could freeze, the pump should be removed to prevent damage.
What are the maintenance requirements for the pump?
Regular checks and maintenance are recommended for long operating life. Use original ABS spare parts for repairs. Avoid improvisation; contact the ABS service center for assistance with any faults or repeated shutdowns.
What are the electrical connection requirements?
Ensure the pump is connected to the correct voltage as specified on the nameplate. Use a socket with earth connection above flood level. For non-plug pumps, connect the cables to the control unit by a qualified electrician. Use a slow-blow fuse and an overload relay.
What should be done if the pump is used in a swimming pool?
Pumps used in swimming pools where people are present must be of Protection Type III with a voltage not exceeding 12V. Ensure the pump is equipped with an earth leakage circuit breaker (30mA) and never operate it when people are in the water.
What are the consequences of using non-original spare parts?
Using non-original spare parts may invalidate warranty claims and compromise safety. Always use original ABS spare parts for repairs to maintain compliance with safety standards and ensure proper functionality.
Related products from ABS
JUMBO 205
User manual 8 pages
JUMBO 14
User manual 8 pages
JUMBO 12
User manual 8 pages
JUMBO 15
User manual 8 pages
JUMBO 24
User manual 8 pages
JUMBO 405
User manual 8 pages
JUMBO 5
User manual 8 pages
JUMBO 84
User manual 8 pages
JUMBO 54
User manual 8 pages
JUMBO S24
User manual 8 pages
ROBUSTA 200 W
User manual 28 pages
ROBUSTA 200 TS
User manual 28 pages
ROBUSTA 300 TS
User manual 28 pages
ROBUSTA 300 W
User manual 28 pages
5537
User manual 32 pages
6537
User manual 32 pages
J
User manual 32 pages
JS
User manual 32 pages
JC
User manual 32 pages