GRE Premium PP202 (82 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
Can this pump be installed in Zone 0 or Zone 1?
No, the pump cannot be installed in Zone 0 (Z0) or Zone 1 (Z1). Refer to pages 61, 62, and 63 for detailed diagrams.
What is the power supply requirement for the pump?
The pump must be connected to an alternating current supply with an earth connection, protected by a residual current device (RCD) with a rated residual operating current not exceeding 30 mA.
What are the temperature limits for the pump operation?
The pump is designed for use with clean water at temperatures between 5 ºC and 35 ºC. Operating outside these limits may cause damage.
How should the pump be installed?
The pump should be installed horizontally, secured to a support to avoid vibration and unwanted noise. It should be placed away from corrosive or flammable products and have sufficient drainage.
What should I do if the pump is not working?
Check that the power supply and frequency match the pump's specifications. Ensure the pump is properly primed and that the water level is at least at the height of the skimmer. If the issue persists, contact the technical assistance service.
What safety precautions should I take when handling the pump?
Always disconnect the power supply before handling the pump. Ensure the ground is dry and avoid contact with the pump while it is operating, especially if you are wet or have wet hands.
What should I do if the pump is blocked?
Check for blockages in the pump or the basket. Ensure the valves are open and the filter is clean. If the issue persists, contact the technical assistance service.
How do I maintain the pump?
Regularly clean the pump and filter to prevent blockages. If the pump is not used for a period, dismantle and clean it before storing in a dry and well-ventilated area. Replace worn components to ensure optimal performance.
What should I do if the pump overheats?
Ensure the pump has adequate ventilation and is not obstructed by dirt. If the motor has burnt out due to overload or flooding, it may need to be replaced. Contact the technical assistance service for further guidance.
What should I do if there is air in the system?
Start the pump and check for suction air leaks in the pipes or connections. Ensure the lid of the basket is properly sealed and there are no leaks under the pump. If the issue persists, contact the technical assistance service.