Parkside PRP 400 C2 (150 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to prepare the pump before use?
Before using the pump, unfold the page with illustrations and familiarize yourself with all functions of the device. Ensure the pump is fully submerged and the shut-off valve is open to prevent airlock.
What is the maximum water temperature the pump can handle?
The pump is designed for use with clear water and rainwater up to a maximum temperature of 35 °C. Using water with higher temperatures may damage the pump and pose a safety risk.
How to adjust the float switch?
To adjust the float switch, loosen the cable from the mounting bracket, position it at the desired level, and secure it. Ensure the switch can move freely to avoid dry running and ensure proper operation.
What is the maximum suction depth of the pump?
The pump can be submerged up to a maximum depth of 7 meters. Ensure the pump is fully submerged and the shut-off valve is open to prevent airlock and ensure efficient operation.
What safety precautions should be taken when using the pump?
Avoid using the pump near flammable liquids or gases to prevent fire or explosion risks. Ensure the pump is not used for aggressive, abrasive, or corrosive substances. Always check for electrical safety and ensure the pump is properly grounded.
How to connect the pump to power?
Connect the pump to a grounded socket with a residual current device (RCD) rated at 30 mA. Ensure the power supply matches the voltage and frequency specified on the nameplate. Never use the pump in wet conditions or with damaged cables.
What is the maximum flow rate of the pump?
The pump has a maximum flow rate of 4000 liters per hour. This ensures efficient water extraction from rain barrels or collection tanks, but it should not be used for continuous operation in water features like garden ponds.
How to clean the pump filter?
To clean the filter, remove it from the pump and rinse it thoroughly with clean water. Ensure the filter is completely dry before reinstallation to prevent clogging and maintain optimal performance.
What should I do if the pump stops automatically?
If the pump stops automatically, check the water level to ensure it is above the float switch. Also, inspect the pump for blockages or damage. If the issue persists, consult the service center for further assistance.
How to store the pump when not in use?
When not in use, store the pump in a dry, ventilated area away from direct sunlight. Ensure all components are clean and dry to prevent corrosion and damage. Avoid storing the pump in environments with high humidity or temperature fluctuations.