Franke FAK 607 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the minimum safety distance between the cooker top and extractor hood?
The minimum safety distance between the cooker top and the extractor hood should be at least 650 mm. Some models may allow for a lower installation height, but this must be confirmed based on working dimensions and installation guidelines.
How do I connect the extractor to the exhaust flue?
Connect the extractor hood to the exhaust flue using a pipe with a minimum diameter of 120 mm. Ensure that the route is as short as possible for optimal performance and safety.
Can the extractor hood be connected to combustion fumes ducts?
No, it is not allowed to connect the extractor hood to exhaust ducts carrying combustion fumes such as those from boilers or fireplaces. This could lead to dangerous backflow of gases.
What should I do if using non-electrical appliances with the hood?
If you are using non-electrical appliances like gas burners, ensure that there is sufficient aeration in the room to prevent exhaust gas from flowing back. The kitchen must have an opening directly communicating with open air for fresh air intake.
What should I do before performing maintenance on the hood?
Before carrying out any maintenance work, switch off or unplug the appliance from the mains supply to ensure your safety and prevent electrical hazards.
How often should filters be cleaned or replaced?
Clean or replace the metal grease filters whenever the FF symbol appears on the display. This typically occurs after 100 working hours, but more frequent cleaning may be required for heavy use.
What is the purpose of the intensive speed function?
The intensive speed function allows you to activate a high suction rate from any previously selected speed. It runs for up to 10 minutes and then reverts to the last selected speed, ideal for situations with heavy vapour or odours.
How do I reset the filter saturation alarm?
To reset the filter saturation alarm, press the E-key for about three seconds. This will clear the alarm and is necessary when filters are full to ensure optimal performance of the hood.
What should be done if using a remote control with the appliance?
The remote control uses 1.5 V carbon-zinc alkaline batteries (LR03AAA type). Ensure that it is not placed near heat sources, and dispose of used batteries properly.
How do I clean the hood body?
Clean the hood using a damp cloth with neutral liquid detergent. Make sure to dry filters completely before reinstallation, as any modification in filter surface may affect its efficiency but not necessarily reduce performance significantly.
Related products from Franke
FSTP NG 1205 X
User manual 44 pages
FSTP NG 1205 X
User manual 64 pages
FSTP NG 605 X
User manual 44 pages
FSTP NG 605 X
User manual 64 pages
FSTP NG 905 X
User manual 44 pages
FSTP NG 905 X
User manual 64 pages
FST PLUS 608 X
User manual 64 pages
FST PLUS 1208 X
User manual 64 pages
FBI 502
User manual 36 pages
FBI 502
User manual 68 pages
FBI 502
User manual 68 pages
FBI 522
User manual 36 pages
FBI 522
User manual 68 pages
FBI 522
User manual 68 pages
FBI 512
User manual 36 pages
FBI 512
User manual 68 pages
FBI 512
User manual 68 pages
FBI 712 GR V3
User manual 68 pages
FBI 712 GR V3
User manual 68 pages
FBI 702
User manual 36 pages