La Cornue CornuFé (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to reset the electronic board after changing the remote code?
After changing the transmission code of the remote control, press the red button located inside the hood (Fig. 9) in the OFF position and then in the ON position after a few seconds. This will disconnect and reconnect the electronic board. Press the light button on the remote control within 15 seconds to synchronize the hood with the remote.
What is the minimum distance between the cooktop and the hood?
The distance between the cooktop surface and the base of the hood must be at least 65 cm to ensure proper ventilation and safety during cooking.
Can the hood be used in recirculation mode?
Yes, the hood can be used in recirculation mode. In this mode, the air and vapors are filtered through a grease trap and an activated carbon panel before being recirculated back into the room.
What are the technical specifications of the hood?
The hood has various motor airflow rates, including 330 m³/h, 490 m³/h, 730 m³/h, and 1000 m³/h. It operates at different power levels, such as 90 W, 145 W, 250 W, and 265 W. The noise level ranges from 45 dba to 63 dba, and the pressure ranges from 10 Pa to 480 Pa.
What safety precautions should be taken when using the hood?
Avoid the presence of open flames near the hood. Ensure that the hood is not connected to a duct used for exhausting gases from gas-powered appliances. Keep children away from the hood, and never use the hood without proper ventilation in areas with gas appliances.
What should be done if the hood is not working properly?
If the hood is not functioning correctly, check the electrical connections and ensure the power supply matches the device's specifications. If the issue persists, consult a qualified technician for further assistance.
How to install the hood?
Before installation, remove the grease trap and use the provided template to drill holes for the mounting brackets. Secure the hood to the support structure using the provided screws and adjust the horizontal and vertical position as needed.
What are the compliance standards for the hood?
The hood complies with several European directives, including the Low Voltage Directive, Electromagnetic Compatibility Directive, and RoHS Directive. It also meets Canadian standards such as CAN/CSA-C22.2 No. 113-2012 and UL Std No. 507.
How to maintain the hood?
Regularly clean the grease trap and activated carbon filter to ensure optimal performance. Avoid using harsh chemicals that may damage the filters. Ensure the hood is disconnected from the power source before performing any maintenance or cleaning.
What should be done with the old hood when it is no longer needed?
When the hood is no longer needed, contact local authorities or the retailer for proper disposal. The hood and its packaging are subject to recycling regulations, and should not be disposed of with regular waste. Follow the guidelines for selective collection and recycling.