Nice FLOR (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the receiver in the Flor series?
The receiver is part of the Flor series by Nice spa and is intended for use on Control units in automated systems for gates, garage doors, and road barriers. It is not suitable for any other use.
What safety precautions should be taken when installing the receiver?
All installation, connection, programming, and maintenance operations must be performed by a qualified technician. Never modify the product without authorization, as this can cause hazards and malfunctions.
How do you connect the receiver to the Control unit?
For models with a 'NICE' connector, insert the connector into the specific one on the Control unit. Ensure the electricity supply is turned off before connecting or removing the receiver. Install the aerial provided and connect it to the designated terminals.
How do you connect an external aerial?
If the provided aerial is in an unfavorable position or the signal is weak, install an external aerial (mod. ABF or ABFKIT). Position it as high as possible and above metallic or reinforced concrete structures. Use a 50 ohm coaxial cable and keep the cable length under 10 meters.
How do you select the relay channels?
Each receiver is designed to recognize all 4 keys on the transmitter. Use the electric jumper in the purpose-provided connectors to associate the relays with the desired key, as detailed in Table 1.
How do you obtain 'NC' type contacts?
The outputs are operated by 'NO' (normally open) relays. To achieve 'NC' (normally closed) contacts, disconnect the power, remove the board, and connect the spots at points 'Y' using a drop of tin. This can be done on one or both relays depending on your requirements.
How do you program the receiver using the standard mode?
Press and release key P1 on the receiver, then transmit the code until LED L1 turns off. Wait 1 second, press and hold any key on the transmitter until LED L1 turns off, and the LED will emit three flashes to confirm successful programming.
How do you delete all codes from the receiver memory?
Press and hold key P1 for 3 seconds until LED L1 turns off. When LED L1 starts flashing again, release key P1 on the third flash and wait approximately 3 seconds. Press key P1 again and release it when the LED turns off. The memory will be cleared if the LED flashes quickly followed by 5 slow flashes.
How do you delete a single transmitter code from the receiver memory?
Press and hold key P1 for approximately 3 seconds until LED L1 turns off. Press and hold any key on the transmitter until LED L1 turns off, then wait 1 second. Press the same key again to confirm deletion, which will be indicated by one flash from LED L1.
What are the special functions available for the output relays?
The receiver supports special functions such as the 'Step-step' function, which keeps the relay activated after the key is released, the 'Timer' function, which activates the relay for a programmed duration, and the 'Burglar Alarm' function, which uses relay 2 to signal when the alarm is enabled or disabled.
Related products from Nice
SMXIS
User manual 16 pages
SMXIS
User manual 112 pages
SMXI
User manual 16 pages
SMXI
User manual 112 pages
SMX2R
User manual 28 pages
mindy TT1N
User manual 44 pages
mindy TT1N
User manual 44 pages
FLOX2
User manual 8 pages
FLOXI2
User manual 8 pages
FLOXM220
User manual 8 pages
FLOX1
User manual 8 pages
FLOXM
User manual 8 pages
FLOXI
User manual 8 pages
MINDY A400
User manual 112 pages
TT2L
User manual 60 pages
TT2N
User manual 60 pages
TT2D
User manual 60 pages
TTD0110
User manual 100 pages
OXI
User manual 152 pages