TEAM ASSOCIATED XP120 (26 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I bind the transmitter and receiver?
To bind the transmitter and receiver, connect the receiver to a power source (receiver battery or ESC), turn it on, then connect the Bind connector to the 'Pair' pins on the receiver. The LED will flash rapidly. Switch on the transmitter and remove the Bind connector from the receiver. The LED should now remain solid, indicating successful binding.
What is the fail-safe function?
The fail-safe function ensures that if the connection between the transmitter and vehicle is interrupted, the vehicle reverts to a preset throttle position. To set this, place the vehicle on a stand so wheels do not touch ground, turn both devices on, connect the Bind connector to 'F/S' pins, move the throttle trigger to your desired fail-safe setting (neutral recommended), then remove and reconnect the Bind connector immediately.
How do I adjust the steering trim?
The Steering Trim allows small adjustments to the steering so that your model will travel straight. When the steering wheel is in its neutral position, use this feature to fine-tune the alignment for optimal performance and control.
What are the specifications of the XP120 system?
The Team Associated XPI 20 2-Channel Radio System operates on a 2.4 GHz frequency band with two channels. It features an ergonomic pistol-grip transmitter, integrated antenna, and compact receiver. The dimensions for the receiver model are approximately 158.23 x 118.75 mm (length x height x width).
How do I replace batteries in the radio?
To install or replace batteries, open the battery box cover to access the compartment. Insert four AA alkaline or rechargeable batteries into the holder, ensuring correct polarity. Close the cover securely and turn on the power. If the LED fails to light, check for proper contact and battery installation.
What is Dynamic Vehicle Control (DVC)?
Dynamic Vehicle Control (DVC) automatically counter-steers your vehicle in low traction or bumpy conditions, improving handling and reducing lap times. It can be adjusted with a Gain setting that controls sensitivity and speed of the effect, available in eight steps from 1 to 7, where 8 disables DVC.
How do I set up the fail-safe position?
To configure the failsafe position, place your vehicle on a stand so wheels are off the ground. Turn both transmitter and receiver on, connect the Bind connector to 'F/S' pins, move throttle trigger to desired setting (neutral recommended), then remove and reinsert the Bind connector immediately for confirmation.
What safety precautions should I take?
Always operate this product with caution. Avoid using it in rain or near lightning strikes. Ensure sufficient battery power before operation. Keep away from children, store at appropriate temperatures (not below -10°C or above 40°C), and remove batteries if the radio will not be used for more than a week.
How do I adjust dual-rate settings?
The Dual-Rate function allows you to add or reduce throttle throw. Use this feature by adjusting the TH D/R switch on your transmitter, which affects how much control is applied during acceleration and deceleration for smoother handling in different conditions.
What should I do if my radio's LED fails to light?
If the power indicator LED does not illuminate after turning on the device, check that batteries are correctly installed with proper polarity. Ensure there is no corrosion or dirt on battery contacts and replace them if necessary for a reliable connection.