Blackmagic Design HyperDeck (782 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I power my HyperDeck?
To power your HyperDeck, connect a standard IEC cable to the power input on the rear panel. Some models also include a 12V DC input for external battery power. For redundancy, you can connect a second IEC cable to an uninterrupted power supply (UPS).
How do I connect video and audio?
Connect your video source to the SDI or HDMI inputs, and your destination equipment to the SDI or HDMI outputs. Audio is embedded in the SDI or HDMI signal, so no separate audio connection is needed. You can check audio levels using the meters on the LCD.
How do I format media for use with HyperDeck?
All HyperDeck Studio models come ready to record with a formatted SSD or SD card. You can format media via the LCD menu settings or using a computer. Refer to the 'Formatting Media' section in this manual for detailed instructions.
How do I insert an SSD into HyperDeck?
Hold the 9.5mm SSD with the connection pins facing the bottom and align it with the drive bay. Gently push the SSD into the bay until it clicks into place. The green indicator will light up to confirm the SSD is recognized and ready to record.
How do I insert an SD card into HyperDeck?
Hold the SD card with the gold connectors facing the LCD and align it with the media slot. Gently push the card into the slot until it clicks. The green indicator above the slot will light up to confirm the SD card is recognized and ready to record.
How do I start recording with HyperDeck?
After confirming your video source is displayed on the LCD, press the record button to start recording. The slot indicator will illuminate red along with the record button, and a record icon will appear on the LCD home screen.
What happens when my media runs out of space?
When there is less than 3 minutes of record time remaining, the timecode counter on the LCD will turn red, and the stop button will flash. Insert a new disk into an empty slot or the ext disk input to continue recording. The timecode will revert to white once the new media is recognized.
How do I switch media during recording?
Hold down the record button to switch from the current disk to the next one. This is useful for transferring recordings without pausing, especially during live events. Ensure the new disk has enough space to avoid dropped frames.
How do I play back recorded video?
Press the play button to start playback. You can navigate between clips using the next clip and previous clip buttons. The video will appear on the LCD and any connected displays. Use the forward or reverse skip buttons to restart or skip to a different clip.
What are the transport controls on HyperDeck?
The transport controls include buttons for record, rewind, play, fast forward, and stop. The skip reverse and skip forward buttons function like previous and next buttons, allowing quick navigation between clips for efficient playback.