Blackzon SPRYTE (28 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the recommended battery for this product?
The manufacturer recommends using only the supplied 2-cell Li-Ion (7.4V) battery pack to ensure safe and optimal performance.
How do I know when my battery needs replacing?
If the LED on your transmitter flashes twice continuously, it indicates that the batteries need to be replaced due to low charge or potential damage risk.
What should I avoid while charging the battery?
Never leave the battery unattended during charging. Avoid using damaged or leaking batteries and chargers. Ensure children are not left unsupervised when handling the charger.
How long does it take to fully charge the battery?
It takes approximately 1 hour and 50 minutes to fully charge the battery via a phone charger with a 5V/1A output. Charging time may increase if using a PC or laptop.
What should I do before operating the model?
Read this manual thoroughly before running your RC vehicle. Ensure you understand all safety precautions and operational instructions to avoid accidents and ensure optimal performance.
How do I connect the battery pack to the charger?
Attach the battery pack to the USB charger as shown in Figure 1, then connect the USB charger to a compatible phone charger with a 5V output. Ensure all connections are secure before starting the charging process.
What is the function of Button B on the transmitter?
Button B allows you to turn the vehicle light on or off by pressing and holding it for three seconds, providing visibility during operation in low-light conditions.
How do I know if my battery is fully charged?
The red LED indicator on your USB charger will go out when the battery is fully charged. This indicates that no further charging is needed at this time.
What should I do if the transmitter does not power on?
Ensure you have inserted two AA batteries correctly into the designated slots and check their polarity. If they are installed properly, try pressing Button B to activate the device.
How do I turn on the receiver?
Press and hold the power switch for 2-3 seconds until the LED indicator lights up, which confirms that the receiver is now powered on and ready for operation.