Compass Model WARP 360 (79 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum allowed headspeed for the WARP 360?
The maximum allowed headspeed for the WARP 360 is 3500 RPM. This limit is set for safety reasons to prevent damage to the helicopter and ensure safe operation.
What is the maximum collectiv pitch for the WARP 360?
The maximum collectiv pitch for the WARP 360 is +/- 13 degrees. This limit is set for safety reasons and to prolong the lifespan of the components.
What is the recommended battery capacity for the 6S configuration?
For the 6S configuration, the recommended battery capacity is between 1200mAh and 1800mAh. This ensures optimal performance and safety during flight.
What is the recommended ESC (Electronic Speed Controller) for the 4S configuration?
For the 4S configuration, it is recommended to use an ESC with a minimum of 50A continuous current. This ensures the motor operates safely and efficiently.
What is the recommended torque for M2 and M2.5 screws?
The recommended torque for M2 screws is approximately 0.5Nm, and for M2.5 screws, it is around 1.1Nm. It is important to use a torque wrench to avoid over-tightening, which can damage the components.
What type of lubricant should be used for ball bearings?
Special ball bearing grease should be used for lubricating ball bearings. Avoid using oils as they are not pressure-resistant and can cause premature wear or fretting.
What should be done if a ball bearing is running rough or making noise?
If a ball bearing is running rough or making noise, it should be replaced immediately. A damaged ball bearing can cause serious damage to the helicopter and should be addressed before flight.
What are the recommended safety distances when flying the WARP 360?
It is recommended to maintain a safe distance of at least 5 meters from yourself, others, parked vehicles, and any obstacles. Flying should be done in open areas away from crowds, power lines, and other hazards.
What should be checked during a pre-flight inspection?
During a pre-flight inspection, you should check all bolted connections, screws, wiring, pins, ball links, and the function of electronic components. Additionally, a function test of the flybarless system should be performed to ensure proper operation.
What should you do if you notice unusual noises or changes in flight behavior during a flight?
If you notice unusual noises or changes in flight behavior during a flight, you should land the helicopter immediately. Continuing to fly under these conditions can pose a serious safety risk.