Multiplex 1-01633 (20 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the main features of the Multiplex 1-01633 electric glider?
The Multiplex 1-01633 is a lightweight Elapor foam electric glider with about 2000 mm wingspan and a ready-to-fly weight near 900 grams. It includes an integrated electric motor for launches, three-axis control with ailerons, elevator and rudder, and reliable 2.4 GHz radio compatibility. The design focuses on stability, easy assembly and durability, making it suitable for intermediate pilots who want precise, efficient gliding performance.
Which type of radio system and receiver does this model require?
This glider supports standard 2.4 GHz radio systems and requires a receiver with at least four channels to operate throttle, ailerons, elevator and rudder. Choose a receiver with quality binding, a configurable failsafe and low latency. Proper channel mapping and range checks before each flight improve safety and allow for predictable, responsive control during both powered launches and thermal soaring.
What battery and flight time can I expect with this glider?
Flight time depends on battery capacity, motor setup, and throttle usage; typical flights range from short powered climbs to longer glides. Many pilots use compact high-discharge LiPo packs matched to the motor and ESC ratings to achieve efficient climbs and several minutes of climb plus extended gliding. Monitor pack voltage, avoid deep discharge and carry spare charged batteries to extend flying sessions safely.
How difficult is the assembly for an intermediate pilot?
Assembly is designed to be straightforward for intermediate pilots: attach wings and tail surfaces, connect servos and receiver plugs, and secure the canopy and battery. Plan about 20–60 minutes depending on experience, and perform careful control surface direction checks, link adjustments and center-of-gravity setup. Taking time during assembly ensures reliable flights and reduces the chance of in-air problems.
How should I set initial control throws for safe handling?
Start with conservative control throws: modest aileron movement, moderate elevator and minimal rudder to prevent overcontrol. Use exponential rates on your transmitter if available to soften responses around neutral. Conduct a few low-altitude test flights, then gradually increase throws as confidence and understanding of the model’s responsiveness grow. Always re-check control directions before each session.
What maintenance does the Elapor foam airframe require?
Elapor foam is durable but benefits from gentle care: clean with a soft damp cloth, avoid aggressive solvents or heat, and protect surfaces from prolonged UV exposure. Small dents or splits can be repaired with foam-safe adhesives or tape. Regularly inspect servo linkages, hinges and motor mount for wear, and keep mounting screws and electrical connections tight for reliable performance.
How should I transport and store the 2000 mm wingspan glider safely?
For transport, remove or secure wings and use a padded transport bag or rigid case to prevent pressure damage to the Elapor foam. When storing, keep the model in a cool, dry place away from direct sunlight and extreme temperatures. Secure loose control rods and disconnect batteries. Proper storage and gentle handling extend airframe life and preserve trim settings between flying sessions.
Which weather and flying conditions are best for this model?
The model performs best in moderate wind and benign thermal conditions that suit intermediate pilots: light to moderate thermals enhance soaring, while strong winds and gusts can make handling challenging. Choose open flying sites with ample landing area and minimal obstacles. Adjust launch power and flap/trim settings to match wind and thermal strength for safer, more efficient flights.
What preflight safety checks should I perform before each flight?
Perform a full preflight routine: check battery charge and secure mounting, verify control surface directions and full, unobstructed movement, confirm receiver binding and failsafe settings, inspect airframe for damage and ensure motor mount and propeller are secure. Conduct a short range check and keep bystanders well clear. These steps reduce the risk of loss or damage and improve flight safety.
Is the Multiplex 1-01633 suited for aerobatics or thermal soaring?
This glider is primarily designed for powered launches and efficient, stable gliding with precise control, making it ideal for thermal soaring and accurate maneuvers. Basic aerobatic maneuvers may be possible with a suitable setup and experienced pilot, but the airframe emphasizes stability over extreme aerobatics. Progress gradually and adjust control throws and center of gravity to match the intended flying style.
Related products from Multiplex
Magister
User manual 60 pages
EasyStar II
User manual 56 pages
Gemini
User manual 40 pages
MULTIflight Stick
User manual 10 pages
FUNNYSTAR
User manual 14 pages
ParkMaster
User manual 14 pages
1-01918
User manual 14 pages
Twister
User manual 14 pages
Twister
User manual 32 pages
1-01959
User manual 14 pages
1-02783
User manual 20 pages
1-01902
User manual 20 pages
PACER
User manual 20 pages
STUNTMASTER
User manual 48 pages
RR Pacer 1-02783
User manual 20 pages
PICO-JET
User manual 28 pages
DG-600
User manual 31 pages
EXTRA 330SC Indoor Edition
User manual 32 pages
microJet
User manual 32 pages
Xeno
User manual 32 pages