Reely Earthcrusher (52 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to properly install the battery in the vehicle?
To install the battery, open both adhesive bands of the battery holder and place the battery into the holder. Ensure that the connection cables point towards the rear axle to avoid interference with the steering mechanism. Secure the battery using the two adhesive bands.
What should I do if the vehicle does not respond correctly to control inputs?
If the vehicle is not responding properly, check the Dual Rate settings on the transmitter and adjust them as needed. Ensure that the trim for gas/break is set so that when you fully release the forward/reverse lever (neutral position), the motor stops turning. If necessary, reprogram the full throttle positions and neutral stance.
How to replace a wheel on the vehicle?
To replace a wheel, first remove the wheel nut. Then carefully take off the old wheel from the axle. Place the new wheel in position so that the hub fits precisely into the wheel adapter bolt hole. Secure the wheel with the wheel nut and use caution not to apply excessive force during tightening.
What type of battery should I use for the vehicle?
The vehicle requires either a 4-cell LiPo battery or two identical 2-cell LiPo batteries (see 'Technical Data' at the end of this manual). When using two 2-cell LiPo batteries, make sure to use the included Y-adapter.
How do I program the full throttle and neutral position on the transmitter?
To set up the full throttle positions for forward/reverse travel and the neutral stance: Turn on the transmitter and place the gas/break lever in the neutral position. Set the trim for the drive function to the middle setting, then switch the reverse switch to 'Reverse'. Hold down the setup button while turning on the speed controller until only the orange LED lights up.
What should I do if the vehicle is not responding when releasing the gas/break lever?
Ensure that the trim for gas/break is set so that when you fully release the forward/reverse lever (neutral position), the motor does not turn. If necessary, reprogram both full throttle positions and neutral stance using the setup procedure.
How to properly charge the vehicle's battery?
Always allow batteries to cool down completely before charging them. Charge only those batteries that are specifically designed for this purpose. Use a high-quality charger suitable for the number of cells and type of battery in your transmitter.
What should I do if the vehicle is not responding correctly when using the remote control?
Ensure that all connections between the receiver, motor, and speed controller are secure. Check that there are no obstructions interfering with the signal from the transmitter to the receiver. Make sure the battery in your transmitter has sufficient charge.
How do I adjust the servo saver settings?
The effect of the servo saver can be adjusted using a tension nut (G) by changing the pressure on both arms (C and D). A too soft setting may cause minor shocks to affect steering precision, while an overly stiff setting could damage the servomotor.
Related products from Reely
Detonator
User manual 47 pages
Rockhard
User manual 100 pages
Truggy Overheater
User manual 37 pages
2348501
User manual 44 pages
RY-BT550
User manual 44 pages
ATOMIC-680
User manual 48 pages
Streetracer
User manual 48 pages
Vector 65
User manual 54 pages
Leopard Pro 36
User manual 57 pages
2WD
User manual 60 pages
Speedy Mania
User manual 60 pages
Hiker SFX
User manual 60 pages
SZD-54
User manual 76 pages
2865870
User manual 80 pages
THOR
User manual 80 pages
X-Cellerator
User manual 80 pages
Mini Wavebreaker
User manual 81 pages
Dragontail
User manual 84 pages
Dragontail
User manual 124 pages
Firestar
User manual 84 pages