fischertechnik PLUS CONTROL SET (112 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to pair the transmitter with the receiver?
To pair the transmitter with the receiver, first insert a 9V battery into the transmitter. Connect the receiver to a power source and wait for the blue LED to blink. Turn on the transmitter, then press the Select button on the transmitter until the LED blinks rapidly. Press the Select button on the receiver until both LEDs stay lit. This establishes a connection between the devices.
What is the range of the transmitter?
The transmitter has a range of more than 10 meters, allowing for remote control of models over a considerable distance.
How to control the speed of the motors?
The speed of the motors can be adjusted continuously by moving the left joystick of the transmitter. The further the joystick is moved, the faster the motor spins. This allows for precise control over the speed and direction of the model.
How to control a tracked vehicle?
To control a tracked vehicle, use the left joystick to control the left motor (M1) and the right joystick to control the right motor (M3). The vehicle will move straight if both motors are driven at the same speed. Turning the joysticks at different speeds will make the vehicle turn, while opposite directions will make it spin in place.
How to activate the cruise control function?
The cruise control function can be activated by pressing the Select button on the transmitter briefly. This allows the vehicle to maintain a constant speed, making it easier to control long distances without manual adjustments.
How to connect two receivers to one transmitter?
To connect two receivers to one transmitter, use the Select button on the transmitter to switch between receivers. The first receiver will be blue, and the second will be yellow. This allows for independent control of multiple models without interference.
What happens if the battery voltage is too low?
If the battery voltage is too low, the LED on the receiver will blink twice per second. This indicates that the battery needs to be replaced or recharged to ensure proper operation of the system.
How to adjust the servo center position?
The servo center position can be adjusted using the trimmer on the receiver. By turning the trimmer, you can set the center position so that the model moves straight when the joystick is in the neutral position. This is essential for accurate steering.
What should I do if the system is not working?
If the system is not working, first check the battery connections and ensure that the transmitter and receiver are properly paired. If the issue persists, refer to the troubleshooting section of the manual for further guidance.
How to turn off the transmitter?
To turn off the transmitter, press the OFF button for about 3 seconds. This will power down the transmitter and conserve battery life. The transmitter can be turned back on by pressing the ON button.