Fusion MS-ARX70 (152 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I pair the ARX70 remote with a stereo?
To pair the ARX70 remote with a stereo, bring the remote within 10 meters of the stereo. Press and hold the remote's button until the status LED alternates green and red. The remote will search for the stereo. If pairing is successful, the LED turns green briefly and then turns off.
What happens if the remote cannot find the stereo?
If the remote cannot find the stereo, the status LED will briefly turn red and then turn off. This indicates a pairing failure. Ensure the stereo is powered on and within range, and try pairing again.
How do I enter zone selection mode on the ARX70 remote?
To enter zone selection mode, press and hold the remote's button until the status LED starts flashing green. This mode allows you to select a specific zone or all zones for volume control.
What are the status LED indicators for the ARX70 remote?
The status LED on the ARX70 remote indicates various states: green short blink for successful transmission, green long blink for successful pairing or zone selection, green flashing for zone selection mode, red short blink for transmission failure, and red long blink for failed pairing or zone selection.
What is the battery type for the ARX70 remote?
The ARX70 remote uses a single CR2032 lithium coin-cell battery. Replace the battery when the remote's performance starts to degrade or when the status LED indicates low power.
How do I mount the ARX70 remote on a boat?
Mount the ARX70 remote in a location within 10 meters of the stereo and not submerged. Ensure the mounting surface is clean and dry. Use a mixture of water and isopropyl alcohol to clean the surface. Secure the remote by pressing it firmly onto the mount and holding for at least 60 seconds.
What should I avoid when mounting the ARX70 remote?
Avoid mounting the ARX70 remote near sources of interference such as strong electromagnetic fields, 2.4 GHz wireless sensors, high-voltage power lines, electric motors, ovens, microwave ovens, and wireless LAN access points. These can affect the remote's performance.
How do I test the range of the ARX70 remote?
To test the range, hold the remote at the selected mounting location, press a few buttons, and confirm that the stereo responds. Ensure the remote is within 10 meters of the stereo and not obstructed by any objects.
What should I do if the remote is not responding?
If the remote is not responding, check that it is within range of the stereo, the stereo is powered on, and the remote is properly mounted. If the issue persists, try re-pairing the remote or replacing the battery.
Can I control multiple zones with the ARX70 remote?
Yes, on compatible stereos, the ARX70 remote allows you to select and control multiple zones. You can choose a specific zone or all zones for volume control. Ensure the stereo supports zone selection and has the necessary software update installed.