Spektrum AR8000 (52 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What aircraft radios is AR8000 compatible with?
The AR8000 receiver is compatible with all Spektrum™ and JR® aircraft radios that support DSM2 technology, including models like the JR12X, X9303, Spektrum DX8, DX7, DX7se, DX6i, DX5e, and Module Systems. It is not compatible with the Spektrum DX6 parkflyer transmitter.
What are the key features of AR8000?
The AR8000 includes an 8-channel full range receiver, patented MultiLink™ technology for dual path RF redundancy, SmartSafe™ failsafe system, QuickConnect™ with Brownout Detection, Flight Log compatibility (optional), and a high-resolution 2048 output. It also features a red LED hold indicator.
How should I install the AR8000 receiver?
For gas or glow aircraft, secure the main receiver using protective foam and rubber bands or hook-and-loop straps. For electric airplanes or helicopters, use thick double-sided foam tape. Mount the remote receiver at least 2 inches away from the primary antenna to improve RF diversity.
What is SmartSafe™ Failsafe?
SmartSafe ensures that if signal loss occurs during flight, only the throttle channel moves to its preset failsafe position (typically low throttle), while all other channels maintain their last commanded positions. This prevents unintended motor activation and maintains control.
How do I bind AR8000 to a DSM2 transmitter?
To bind an AR8000 receiver, insert the bind plug into the BATT/BIND port on the receiver, power it up (LED should flash), adjust the transmitter sticks and switches to desired failsafe positions, enter Bind Mode per your transmitter's instructions. Once connected, remove the bind plug before turning off.
What is QuickConnect™ with Brownout Detection?
QuickConnect allows the system to automatically reconnect when power is restored after a brownout (voltage drop below 3.5 volts). The LED on the receiver flashes slowly during an interruption, and the system re-establishes connection within seconds if the transmitter remains powered.
How do I perform a range test for AR8000?
To conduct a basic range test, place your model 30 paces away from the transmitter. Put the transmitter into range check mode and ensure full control is maintained at that distance. If issues occur, contact Horizon Hobby support or consult advanced testing procedures using Flight Log data.
What are the power system requirements for AR8000?
The AR8000 requires a minimum operational voltage of 3.5 volts. It is crucial to ensure that your battery and ESC can supply sufficient current during flight, as inadequate power systems may lead to in-flight failures or brownouts.
How does the Flight Log help with RF performance?
The Flight Log (SPM9540) provides detailed data on receiver voltage, antenna fades, and frame losses. It helps identify issues like poor signal reception by showing how many times each antenna loses connection during a flight. This aids in optimizing installation for better link stability.
What should I do if the AR8000 loses its bind?
The receiver will not lose its bind unless instructed to, typically through an accidental activation of the bind button on the transmitter. If this occurs during flight or setup, ensure that all transmitters and receivers are functioning correctly, rebind as needed, and avoid using amplified Y-harnesses which can interfere with signal integrity.