Polytron HDM 4 C (44 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum number of HDMI signals supported by this modulator?
The HDM 4 C supports up to four HDMI signals and one ASI transport stream, which can be converted into a DVB-C (QAM) channel. It also provides IP streams for IPTV networks.
Can the device handle both MPEG-2 and MPEG-4 video formats?
Yes, the modulator supports either MPEG-2 or MPEG-4 standards as the video format. This flexibility allows it to work with a variety of input sources such as receivers, computers, cameras, and DVD players.
What happens if there is a power outage?
All data remains intact even after a power failure due to internal memory retention, ensuring no loss of configuration or processing state.
How are the basic settings configured at delivery?
The HDM 4 C comes pre-configured according to hardware specifications. It defaults to using H.264 video format with all modulator outputs active and provides a standard IP output for network integration.
What is the default RF frequency range for DVB-C modulation?
The device supports frequencies between 30 MHz and 960 MHz, with pre-set options at 306/314/322/330 MHz. These can be adjusted based on network requirements.
How do you configure the IP output settings for streaming?
IP outputs are set through the web interface or device menu, allowing customization of multicast addresses and ports (e.g., 224.002.002.002 with specific UDP port numbers). These can be adjusted to match network infrastructure.
What is the purpose of the ASI outputs?
The two ASI outputs provide access to the modulator's signal for further processing, enabling integration into other systems or networks that require raw transport stream data.
How can you reset the device to factory settings?
A factory reset is available through the system menu. This restores all configurations to default values and reverts network and modulator parameters to their original state as specified in the manual.
What are the standard IP address and subnet mask for initial setup?
The default IP address is 192.168.001.225 with a subnet mask of 255.255.255.000, allowing access via web browser or network management software.
What are the available modulation standards for DVB-C?
The modulator supports J.83A (DVB-C Annex A) as a default standard with options to configure other formats like J.83B and J.83C, depending on network requirements.