Master Lock MLD08E (116 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to open the safe for the first time?
To open the safe for the first time, insert the key and turn it. Do not lock the key inside. Remove the battery pack cover and insert four AA alkaline batteries. Replace the battery cover.
How to program a digital user code?
To program a digital user code, pull out the battery pack while keeping the batteries connected. Find the button behind the battery pack. Enter a four, five, or six-digit code. A successful programming is indicated by the LED flashing green three times.
How to program a primary user's fingerprint?
To program a primary user's fingerprint, press and hold the reset button until the keypad flashes three times. Swipe your finger across the fingerprint scanner multiple times. The LED will flash green for each valid scan. Once enough scans are done, the LED will flash green three times.
How to remove a primary user's fingerprint?
To remove a primary user's fingerprint, press and hold the button until the keypad flashes three times. Swipe your finger once across the fingerprint scanner and wait 10 seconds. The red LED will flash three times to indicate the fingerprint has been erased.
How to lock the safe?
To lock the safe, close the lid. Once the lid is closed, the safe is securely locked. Ensure the override key is in the locked position and stored in a secure location.
How to bolt down the safe?
To bolt down the safe, use the lag screws and washers provided. Drill holes in the surface using the pre-drilled holes on the safe. Replace the safe over the holes and install the screws. Ensure the safe is mounted horizontally.
What to do if the red LED blinks three times?
If the red LED blinks three times, it indicates an incorrect code or fingerprint was entered. Verify the code and re-enter it, or reprogram the safe if necessary.
What to do if the red LED blinks once every ten seconds?
If the red LED blinks once every ten seconds, it indicates low battery power. Replace the batteries with four AA alkaline batteries. Do not use rechargeable or non-alkaline batteries.
What to do if the safe cannot be opened after entering the code?
If the safe cannot be opened after entering the code, the batteries may have reached the end of their life. Use the override key to open the safe and replace the batteries with four AA alkaline batteries.
What to do if the lid does not open with the override key?
If the lid does not open with the override key, the gas strut may have stopped working. Use a magnet to open the lid or turn the unit upside down. Be cautious as contents may fall out.