Greencut SRM120C (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety precautions should I take when using this tool?
Always read and understand all safety warnings and instructions before using the tool. Avoid situations that could lead to electrical shocks, fires, or serious injuries. Ensure all safety components are installed and in good condition. Keep your hair, clothing, and jewelry away from moving parts, and never leave the tool unattended while it is running.
How do I adjust the blade guard?
To adjust the blade guard, loosen the screw, tilt the guard so it is parallel to the table, and tighten the screw. Ensure the guard is flat above the workpiece when cutting at an angle. Always check the guard is securely fastened before operating the tool.
What is the maximum cutting height at 90 degrees?
The maximum cutting height at 90 degrees is 50mm. This ensures the tool can handle standard wood cutting tasks while maintaining stability and safety during operation.
How do I secure the tool to a workbench?
Secure the tool to a stable workbench using appropriate fasteners. Mark and drill holes in the workbench using the tool's base as a guide. Place a soft foam pad between the tool and the workbench to reduce noise and vibrations. Ensure the tool is firmly fixed to prevent tipping or movement.
What should I do if the blade gets stuck?
If the blade becomes stuck, immediately turn off the tool and disconnect it from the power source. Do not attempt to force the blade; instead, allow the tool to cool down and inspect the blade for damage. Replace any damaged blades before continuing use.
What is the noise level of the tool?
The noise level of the tool is 78.4dB(A) when unloaded and 87.4dB(A) when loaded. Use appropriate ear protection to minimize exposure to these levels and maintain a safe working environment.
How do I adjust the table angle?
To adjust the table angle, loosen the locking knob, move the table to the desired angle, and secure it in place. Use a combination square to ensure the table is exactly at 90° relative to the blade. Tighten all screws to maintain stability and accuracy during cutting.
What are the technical specifications of the tool?
The tool has a nominal input voltage of 240V ~ 50Hz, a power rating of 120W, and operates in S2 mode for 30 minutes. It has a variable speed range of 550~1600 RPM, a blade stroke length of 18mm, and a maximum cutting height of 50mm at 90°. The tool weighs 12Kg and has a noise level of 78.4dB(A) when unloaded.
What should I do if the tool is damaged?
If the tool is damaged or any parts are missing, do not use it. Contact the official technical service for replacement parts or repairs. Using a damaged tool can lead to serious injuries or equipment failure.
How do I clean the tool after use?
After use, clean the tool to remove dust and debris. Use a vacuum or manually remove the sawdust by removing the screws and metal plate on the left side of the tool. Ensure the tool is completely powered off and disconnected before cleaning to avoid any risk of injury.