PSC Magellan 8200 (44 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the scanner handle barcodes on different sides of an item?
The Magellan® 8100/8200 scanner can read barcodes from multiple angles, including left, right, front, back, and bottom. This eliminates the need to reorient items during scanning.
What is the purpose of the L-shaped All-Weighs™ platter?
The L-shaped All-Weighs™ platter allows you to place items anywhere on its surface for accurate weighing, including leaning against its vertical section. This ensures precise weight measurement.
How do I zero the scale using the scanner?
To zero the scale, press and hold the Scale Zero Push Button until the yellow LED lights up or use the momentary press function if programmed to do so. The indicator will confirm when the scale is at zero weight.
What does a continuous green LED flash indicate on the scanner?
A continuous green LED flash indicates that the scanner is in Label Programming Mode. To exit this mode, you need to cycle power or press and hold the Scale Zero Push Button until it stops flashing.
How can I adjust the volume of the scanner's speaker?
To increase the volume, briefly press the Volume/Tone Push Button. The volume will incrementally increase with each press, cycling back to the lowest setting if repeated after reaching maximum volume.
What is the function of the Scale Zero Push Button in diagnostics mode?
In Scale Diagnostics Mode, pressing and holding the Scale Zero Push Button for four seconds allows system support personnel to troubleshoot scale-related issues. This mode should only be used by trained professionals.
How do I wake up the scanner from Sleep Mode?
To awaken the scanner from Sleep Mode, you can either press and hold the Volume/Tone Push Button for a few seconds or move an object through the scan zone. The scanner will resume operation automatically.
What does it mean if the green LED blinks at a 2-second rate?
A blinking green LED with a 2-second interval indicates that the scanner is in Sleep Mode due to extended inactivity. This means the motor and laser have turned off, but scanning can be resumed by moving an item through the scan zone.
What should I do if the yellow LED flashes continuously?
A continuous flashing of the yellow LED indicates that the scale is disabled or a fatal FRU (Field Replaceable Unit) failure has been detected. If you hear a low tone but no flashing, contact systems support for assistance.
How can I change the beeper tone on the scanner?
To adjust the beeper tone, press and hold the Volume/Tone Push Button for approximately 2 seconds. This will cycle through three different tones (high, medium, or low), allowing you to select your preferred sound.