Aritech ATS626 (20 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the Aritech ATS626 detect human movement?
The ATS626 uses a passive infrared (PIR) sensor to detect changes in infrared radiation caused by moving warm bodies. It senses differential temperature patterns, triggers when human-sized heat signatures move across its field, and reduces response to stationary heat sources.
What is the effective detection range and coverage angle of the ATS626?
The device reliably detects movement up to approximately 12 meters with a roughly 90-degree horizontal coverage angle. Actual range depends on mounting height, environmental conditions and obstructions, so placement should consider clear line-of-sight for best performance.
Can I mount the ATS626 on a wall and on a ceiling, and how high should it be placed?
The compact ATS626 is suitable for both wall and ceiling mounting. For typical indoor use, install it at recommended heights by installers to balance coverage and false alarm reduction; avoid mounting near heat sources or direct airflow to maintain stability.
Is the Aritech ATS626 compatible with standard alarm control panels?
Yes, the ATS626 is designed to integrate with standard alarm systems and control panels. It presents a conventional detector output that installers can interface with alarm inputs, allowing reliable signaling while relying on the panel to manage alarm logic and reporting.
How does the pet immunity feature reduce false alarms from animals?
Pet immunity selectively filters small, low thermal-mass targets so cats and many small dogs are less likely to trigger the detector. Sensitivity and mounting height also influence immunity, so adjust settings and position to minimize pet-related alarms without compromising human detection.
How do I adjust the sensitivity and when should I change it?
The ATS626 offers adjustable sensitivity to balance detection versus false alarms. Increase sensitivity for larger rooms or long-range detection, and reduce it in high-traffic or noisy environments. Make small incremental changes and test coverage after each adjustment.
What benefit does built-in temperature compensation provide?
Temperature compensation keeps PIR sensitivity stable as ambient temperatures change, preventing reduced range on hot days and excessive sensitivity in cool conditions. This ensures consistent detection performance across typical indoor temperature variations without frequent manual re-setting.
What are common causes of false alarms and how can I reduce them?
Typical causes include drafts, HVAC outlets, direct sunlight, moving curtains, insects near the lens, and incorrect mounting height. Reduce false alarms by relocating the detector away from disturbances, adjusting sensitivity, cleaning the lens, and stabilizing the mounting surface.
What power options does the ATS626 use and how does low consumption help?
The ATS626 is optimized for low power consumption so it places minimal load on alarm system supplies or backup batteries. It is intended to be powered from typical alarm system low-voltage supplies, helping extend battery backup life in the overall security installation.
How should I maintain the ATS626 to ensure reliable long-term operation?
Maintain the detector by keeping the lens free of dust and obstructions, avoiding painting or covering the unit, and checking physical mounting periodically. Regular functional tests and prompt replacement of defective units help maintain reliable intrusion detection over time.