Cresto W2TH (137 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum force the device can reduce during a fall?
The device is designed to reduce peak forces generated during a fall below 6kN when used in accordance with the manual. It is intended for use in fall arrest applications and must not allow free fall.
What are the applicable safety standards for this equipment?
The equipment meets or exceeds EN360:2002 and RfU CNB/P/11.060 standards. It has also been tested to the requirements of VG11 RfU CNB/P/11.060 and is subject to the conformity assessment procedure under Module D of the Regulation.
What is the maximum user weight for each model?
For W2H & W2TH, the maximum weight is 140kg for overhead use and 100kg for leading edge use. For C10H and C15H, the maximum weight is 150kg for both overhead and leading edge use.
What are the limitations for horizontal use?
The device has been tested for horizontal use in accordance with CNB/P/11.060, but loading over an edge should be avoided. The retractable type fall arrester was tested for horizontal use over a Type A edge, which is defined as a steel edge with a radius of 0.5mm and no burrs.
What materials are used in the construction of the device?
The device is constructed from PC/ABS, aluminium alloy, steel, stainless steel, nylon, PTFE, and Dyneema® (for webbing lifelines only). These materials are selected for durability and performance in fall arrest applications.
What are the safety requirements for anchorage points?
Anchorage points in the personal fall arrest system must be rated to withstand a minimum 12kN load and must be EN 795:2012 or 1997+A1:2000 approved. The Competent Person must ensure that anchorage points are strong, accessible, and positioned as high as possible without restricting movement.
What are the requirements for fall clearance?
Fall clearance must be sufficient to arrest a fall before the user hits the ground or an obstruction. A Competent Person must calculate fall clearance, considering a minimum 1m safety factor, deceleration distance, user height, lanyard length, harness stretch, free fall, swing fall, and other applicable factors.
What are the risks associated with swing falls?
Swing falls occur when the anchor is not directly above the fall location, significantly increasing the risk of serious injury or death. Swing falls must be included in fall clearance calculations, and users should work as close to the anchor point as possible to minimize this risk.
What are the requirements for connectors and compatibility?
All connectors must be EN362:2004 approved and compatible with the retractable type fall arrester. Connections must be made in a way that eliminates the risk of roll-out, which occurs when a hook gate unintentionally opens due to interference with the attachment point.
What are the installation and use guidelines for horizontal use?
During horizontal use, the working area and lateral movements must be limited to a maximum of 1.5m from the center axis of the anchorage point. The anchor point must be at the same height as the edge or above it, never below. A minimum setback distance of 2.5m from the leading edge is required for certain models.