Hellberg Secure SYNERGY (190 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the weight of the Synergy Headband?
The Synergy Headband weighs 459 grams and is designed for use with the Synergy hearing protection system. It is compatible with various helmet and cap mounts and offers noise attenuation in accordance with EN 352-1:2002 standards.
What is the noise attenuation level of the Synergy Headband?
The Synergy Headband provides noise attenuation levels ranging from 15 dB at 63 Hz to 42.7 dB at 8000 Hz. These values are based on the mean attenuation and are designed to offer effective noise reduction in industrial and hazardous environments.
How do I pair the Synergy headset with a Bluetooth device?
To pair the Synergy headset with a Bluetooth device, press and hold the Bluetooth knob for 3 seconds until you hear 4 ascending tones. This puts the headset into pairing mode. Then, on your Bluetooth-enabled device, search for and connect to 'HELLBERG SYNERGY'. If a PIN is required, enter 0000.
What is the maximum battery life of the Synergy headset?
The Synergy headset has a battery life of approximately 62 hours when using Bluetooth streaming and level-dependent attenuation, and 56 hours when using AM/FM radio and level-dependent attenuation. These times may vary based on environmental conditions and usage patterns.
How do I adjust the volume for the AM/FM radio?
To adjust the volume for the AM/FM radio, turn the dial (A:10) clockwise to increase the volume or counterclockwise to decrease it. Ensure that the volume is set appropriately to hear warning signals in noisy environments.
What should I do if the Bluetooth connection is lost?
If the Bluetooth connection is lost, you will hear two tones in the headset. To re-establish the link, press the Bluetooth knob while within range (less than 10 meters). The headset will confirm the reconnection with an audio signal.
How do I use the Level Dependent 'Active Listening' feature?
To use the Level Dependent 'Active Listening' feature, turn the dial (A:12) to activate the active listening microphones. Adjust the volume as needed, and ensure that the function is operational before using the headset in a noisy environment.
What are the approved helmet combinations for the Synergy system?
The Synergy system is compatible with various helmet and cap models, including models from Auboueix, Schuberth, Bjornklader, Scott Safety, Centurion, Cerva, Irudek, Singing Rock, JSP, Sundström, Uvex, KASK, 3M Peltor, and Petzl. Each model has specific adapter requirements for compatibility.
How do I clean the Synergy headset?
To clean the Synergy headset, use mild soap and ensure that the detergent does not irritate the skin. Store the headset in its original packaging when not in use. Do not submerge the product in water. When damp, turn the shells outwards and remove the cushions for drying.
What should I do if the headset shows signs of damage?
If the Synergy headset shows signs of cracks or damage, it should be immediately discarded. Continued use of a damaged headset may compromise its noise attenuation performance and pose a risk to the user's hearing safety.