Log in


or


google Continue with Google facebook Continue with Facebook

Already have an account?

Helo WE 30 (83 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Helo WE 30 is a security technology device designed for surveillance and monitoring purposes. It features advanced motion detection capabilities and high-resolution imaging to ensure clear visibility even in low-light conditions. The device is equipped with a durable housing that allows for reliable outdoor use. It supports wireless connectivity for easy integration into existing security systems. The Helo WE 30 is suitable for both residential and commercial applications, providing users with a reliable and efficient solution for enhancing security.

Frequently Asked Questions

What is the minimum volume for the sauna?

The minimum volume for the sauna should not be less than the ratio of the heater power (kW) to the sauna volume (m³). Ensure the sauna volume meets the specified requirements in the heater's instruction manual.

What is the recommended height for the sauna?

The sauna height should be between 1900 mm and 2100 mm, depending on the heater's power. Refer to the heater's table for the exact minimum height requirement.

How to install the air vent for the heater?

The air vent should be installed at least 1000 mm away from the heater. For a 360° vent, ensure it is at least 1000 mm from the heater. For a 180° vent, it should be at least 500 mm away.

How to install the temperature sensor in the ceiling?

When installing the temperature sensor in the ceiling, drill a 5 mm hole in the sensor housing to allow water to drain. Avoid directing water directly at the sensor or throwing water at it from a distance.

What is the purpose of the extra temperature sensor?

The extra temperature sensor (OLET 31) is connected to the RJ10 terminal on the control panel. It provides an additional temperature reading and helps prevent overheating beyond 110°C. The main sensor controls the maximum temperature setting.

How to install the door switch?

The door switch should be installed at least 300 mm from the inside corner of the sauna door. The switch is mounted on the door frame, and the magnet is attached to the door. The switch should be no more than 18 mm away from the magnet.

What are the wiring colors for the door switch?

The wiring colors for the door switch are orange for the signal wire and green/white for the ground. The 12 VDC is connected to the switch's pin 4.

How to wire the remote control?

The remote control is connected to the RJ10 terminal pins 3 and 4 of the control panel. The recommended cable size is AWG 24 or 26. The maximum length for AWG 24 is 200 meters, and for AWG 26, it is 130 meters.

What is the function of the contactor box?

The contactor box (WE 30) is used to control the heater and is compatible with specific heater models. It is installed outside the sauna and must be connected according to the wiring diagram provided in the manual.

How to connect the control panel to the heater?

The control panel (Pure or Elite) is connected to the heater via the contactor box. The wiring must follow the specified diagram, and the control panel must be connected to the power supply according to the electrical specifications provided.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5