Beckhoff KL6583 (2 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the Beckhoff KL6583 and what does it do?
The Beckhoff KL6583 is an EtherCAT bus terminal that provides a single-channel RS-232 sender-receiver interface for integrating serial devices into industrial automation networks. It maps serial data to EtherCAT process data, enabling machine control, data acquisition and flexible device integration while maintaining real-time communication and compact mounting in control cabinets.
Which serial protocols and baud rates does the KL6583 support?
The KL6583 supports common serial protocols used over RS-232, including simple ASCII, Modbus RTU and many proprietary protocols when implemented by the controller. It supports high-speed transmission up to 115.2 kbps; protocol handling is performed at the application or master level, so proper parameter matching is required for reliable communication.
How do I wire a device to the KL6583 RS-232 port?
Wiring uses standard RS-232 signal lines such as Tx, Rx and signal ground; specific pin assignments depend on the connector variant and the attached device. Ensure correct transmit/receive pairing, common ground reference and optionally handshake signals where supported. Always verify device pinouts and keep cable lengths and shielding suitable for industrial environments.
Can the KL6583 be used in multi-drop serial networks?
Yes, the KL6583 can participate in multi-drop setups when the connected devices and protocol support addressing and bus sharing. RS-232 is traditionally point-to-point, so multi-drop operation requires protocol-level addressing or external hardware. Design the network with compatible devices and consider bus repeaters or converters for larger topologies.
How is the KL6583 mounted and integrated into an EtherCAT system?
The KL6583 is a modular bus terminal designed for DIN-rail mounting alongside other EtherCAT terminals and connects to the EtherCAT backbone via the terminal coupler. Integration requires assigning the terminal in the EtherCAT device configuration and mapping serial process data to the controller, enabling seamless interaction with PLC logic and other field devices.
What diagnostic features help identify communication errors on the KL6583?
The module provides runtime diagnostics via EtherCAT and status indicators that show link and data activity, helping to pinpoint transmission errors, framing or parity mismatches and physical-layer faults. Diagnostic registers exposed to the controller allow logging error counts and link status for faster troubleshooting and preventive maintenance.
What environmental conditions can the KL6583 withstand in industrial use?
The KL6583 is engineered for industrial environments and operates across a wide temperature range and under typical shop-floor stresses. It is built for robust performance with resistance to vibration and electrical noise, but you should position it in a properly ventilated cabinet and observe the product's specified limits for temperature, humidity and shock for long-term reliability.
How fast is data transmission over the KL6583 RS-232 interface?
Data transmission over the KL6583 RS-232 interface supports baud rates up to 115.2 kbps, providing sufficient throughput for many machine control and data acquisition tasks. To achieve reliable speeds, match baud and framing parameters between the terminal and devices, and use appropriate cabling and short runs where possible to minimize errors.
What cables and connectors are recommended for reliable RS-232 links?
Use high-quality, shielded serial cables with robust connectors compatible with your devices; keep cable runs as short as practical because RS-232 performance degrades over long distances. Avoid routing serial cables alongside heavy power cables, and use strain relief and industrial-grade connectors to ensure stable connections in vibration-prone environments.
How do I configure the KL6583 for serial communication in an EtherCAT application?
Configuration involves assigning the KL6583 in the EtherCAT device tree, mapping its process data to the controller and setting serial parameters such as baud rate, parity and stop bits so they match the attached device. Additionally, implement the appropriate protocol handling in the PLC or gateway and use diagnostics to verify correct data flow after commissioning.