EFFEKTIV TRIUMPHATOR 2000X (90 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to connect the machine to the power supply?
To connect the machine to the power supply, first turn off the power switch and unplug the machine. Then, connect the power supply plug to your power source. Finally, turn the power switch back on.
How to adjust the presser foot pressure?
The presser foot pressure can be adjusted using the presser foot pressure lever. For most fabrics, the standard setting is 'N'. If you are working with lighter or heavier fabrics, you can choose from six positions to reset the pressure.
How to adjust the stitch length?
To adjust the stitch length, turn the stitch length dial. The larger the number, the longer the stitch. For regular sewing, set the stitch length at 3 - 3.5.
How to change the needles?
To change the needles, first turn off the power switch and unplug the machine. Raise the needle to its highest position by turning the balance wheel toward you. Loosen the needle clamp screw, insert a new needle, and tighten the screw securely.
How to thread the machine?
To thread the machine, first turn off the power switch and unplug the machine. Raise the presser foot lifter. Thread the machine in the following order: left needle thread, center needle thread, right needle thread, and looper thread. Ensure the thread passes through all guides and tension discs.
How to thread the needles?
To thread the needles, pass the thread through the telescopic thread guide from the right side, then through the thread guide plate. Insert the thread between the tension discs and tighten slightly. Ensure the thread passes through all guides and tension discs.
How to use the threader?
To use the threader, insert the thread into the slit of the Y-shaped notch. Place the V-shaped notch over the needle just above the eye. Slide the threader down the needle until the pin enters the eye. Push the threader to pass the thread through the eye, then remove the threader and use the hook to pull the loop.
How to adjust the differential dial?
To adjust the differential dial, turn the dial to set the ratio between the main and sub feed motion. For regular sewing, set the dial at 1.0. For fine fabrics that tend to pucker, use a lower number. For stretch fabrics like knits, use a higher number.
How to raise or lower the presser foot?
To raise or lower the presser foot, use the presser foot lifter. The presser foot should always be lowered when sewing, except when threading or testing the machine. Raising the presser foot loosens the thread tension.
How to control the sewing speed?
To control the sewing speed, use the foot control. The harder you press on the control, the faster the machine runs. Practice controlling the speed by stepping on the foot control with the presser foot lifter up.