Create Speaker Fire (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to turn the speaker on and off?
To turn the speaker on, press and hold the power button until you hear the voice prompt 'Bluetooth'. The speaker will enter Bluetooth mode by default. To turn it off, press and hold the power button while the speaker is on, and an acoustic signal will indicate it has been turned off.
How to charge the speaker?
Insert the Type-C cable into the charging port to charge the speaker. The red indicator light will illuminate during charging, and it will turn green when fully charged. Always use a 5V charger to avoid damage to the speaker.
What to do if the battery is low?
When the battery capacity is low, the voice prompt will sound 'Low battery' to remind you to charge the speaker. If the speaker is not charged after a period of time, it will automatically turn off.
Insert the cable into the auxiliary socket. The speaker will automatically switch to auxiliary mode. The indicator light will turn green when in auxiliary mode. When the indicator light shows blue, Bluetooth will be disabled.
How to connect the speaker via Bluetooth?
The speaker will enter Bluetooth mode by default. At this point, you can pair it with your device. To activate Bluetooth, remove the auxiliary cable, and a beep will sound indicating Bluetooth mode is active.
How to pair two speakers via TWS?
Turn on both speakers. Press the power button twice to enter pairing mode, and the indicator light will flash orange quickly. After pairing, the master speaker's indicator light will remain on, and the linked speaker will flash slowly. To disconnect, short press the power button once.
How to extinguish the flame safely?
To extinguish the flame, use the extinguishing hook next to the fire cover, smothering the fire with the round surface. Leave it there for about 10 seconds. Remove the hook and check carefully that the fire has been extinguished correctly.
How to place the fireplace safely?
Place the fireplace on a stable, flat, non-flammable surface. Ensure the wall/table/floor can support its weight. Place the burner tank in the product safety tank and the security deposit on the base. Fill the burner with bioethanol to the maximum indicator.
What safety precautions should I take when using the fireplace?
Keep children and pets at a safe distance. Do not place flammable objects on top of the appliance. Avoid contact of bioethanol with skin. Ensure suitable fire extinguishers are nearby. Do not use the device in closed places. Make sure there is good ventilation to ensure the necessary air exchange.
What should I do if the device overheats?
Do not touch the fireplace surfaces as they may become hot during operation. Do not turn on or cover the appliance while it is hot. The device must only be used on a stable surface made of non-flammable material. If the device overheats, turn it off and allow it to cool down before using again.