dB Technologies Ready 4 (100 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to replace the battery in READY 4?
To replace the battery, open the battery compartment on the back of the speaker, remove the two screws, extract the faston cables from the battery slot, partially insert the new battery, connect the red faston cable to the positive terminal and the black faston cable to the negative terminal, fully insert the battery, and close the compartment with the screws.
What is the battery capacity of READY 4?
The READY 4 is equipped with a 12V 7Ah lead-acid battery that is partially charged for safety reasons. This battery can be replaced if it becomes depleted, and it is important to ensure the battery is recharged every three months for 14 hours to maintain efficiency.
How to charge the battery for the first time?
Before using the speaker for the first time, fully charge the battery. Ensure the speaker is turned off, connect it to a 15Vdc power supply via the DC MAIN INPUT port, and wait until the red 'LIMITER' indicator stops flashing, indicating the battery is fully charged.
What does the red 'LIMITER' indicator mean?
The red 'LIMITER' indicator lights up when the battery voltage drops below the minimum threshold (around 9.5-10 volts), which protects the battery from complete discharge. This also prevents amplifier distortion and speaker overloading. If the indicator remains on, the battery needs to be recharged immediately.
How to connect the speaker to an external power source?
To connect the speaker to the mains, use the VDE connector and ensure the power supply parameters match the requirements. Set the 'POWER' switch to 'EXTERNAL POWER' to enable the battery to charge partially during use. The VDE connector is the disconnect device and must remain accessible during operation.
What is the function of the OLED display?
The OLED display shows the battery status, signal level, and system status. It also indicates when the battery is low, when the 'LIMITER' circuit is active, and the current input source. The display is controlled via the buttons located beneath it.
How to adjust the volume on READY 4?
Use the volume controls to adjust the general output level, the input signal level from the XLR/Jack connector, the radio microphone input level, and the input level from RCA, USB, or Bluetooth. Each volume control is labeled for easy identification and adjustment.
What is the purpose of the XLR input?
The XLR input is a balanced connection for connecting a dynamic microphone with low impedance or a high-level audio source such as a preamplifier, mixer, recorder, CD player, or musical instrument. The input selector can be set to 'MIC' for unbalanced or balanced microphones, or 'LINE' for balanced or unbalanced line-level sources.
What audio formats are supported by the USB Media Reader?
The USB Media Reader supports the following audio formats: *.mp3, *.mp2, *.mp1, *.asf, *.wma, *.m4a, *.3gp, and *.mp4. These files can be played directly from a connected device, making it easy to access and play digital audio content.
How to use the Mix Out function?
The Mix Out port allows you to send the mixed audio signal to another amplified speaker, a recorder, or an additional amplifier. Use a 6.3mm (1/4") unbalanced jack cable to connect the output to the desired device, ensuring the signal is transmitted clearly and without loss.
Related products from dB Technologies
M10-2 PLUS
User manual 13 pages
M12-4 PLUS
User manual 13 pages
OPERA LIVE 202
User manual 13 pages
OPERA LIVE 405
User manual 13 pages
OPERA LIVE 205
User manual 13 pages
OPERA LIVE 402
User manual 13 pages
SIGMA S115
User manual 20 pages
SIGMA-Serie
User manual 20 pages
L160D
User manual 24 pages
L80D
User manual 24 pages
LVX 8 WHITE
User manual 40 pages
IS26T
User manual 58 pages
IS26T
User manual 58 pages
FlexSys FMX10
User manual 73 pages
FlexSys FMX15
User manual 73 pages
OPERA12
User manual 83 pages
OPERA10
User manual 83 pages
OPERA15
User manual 83 pages
B-HYPE MOBILE
User manual 90 pages
LVX_XM12
User manual 93 pages