Log in


or


google Continue with Google

Already have an account?

Kicker PS694 (12 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 1
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Kicker PS694 is a 6x9-inch two-way automotive speaker designed for enhanced in-vehicle audio performance. It features a durable polypropylene woofer cone that delivers strong midrange and bass response, paired with a dedicated tweeter for crisp high frequencies. The speaker supports up to 360 watts peak power and 180 watts RMS, with a 4-ohm impedance for efficient amplification. Its frequency response spans approximately 30 Hz to 21 kHz, providing a balanced sound across the audible spectrum. Constructed with a steel basket and protective elements, it ensures reliability in demanding environments. This model emphasizes clear audio reproduction without distortion at higher volumes.

Frequently Asked Questions

What power handling specifications does the Kicker PS694 have?

The Kicker PS694 supports up to 360 watts peak and 180 watts RMS, meaning it can handle sustained power around 180 W without damage. This delivers louder, cleaner sound when paired with an appropriately rated amplifier; tip: match RMS ratings rather than peak values for reliable performance.

What are the physical dimensions and driver configuration of the PS694?

The PS694 is a 6x9-inch two-way coaxial speaker with a polypropylene woofer and a dedicated tweeter. This configuration provides extended bass and clear highs in one unit; tip: check mounting depth and bolt pattern before purchase to ensure proper fit in your vehicle.

What frequency range does the Kicker PS694 cover?

This speaker covers approximately 30 Hz to 21 kHz, giving a broad frequency span from low bass to detailed highs. That yields a balanced in-car soundstage; tip: pair with a subwoofer for deeper bass below 30 Hz if you require greater low-frequency extension.

How does the polypropylene woofer cone affect sound and durability?

The polypropylene cone offers a stiff, lightweight diaphragm that produces strong midrange and bass with low coloration, while resisting moisture and heat. This improves reliability in automotive conditions; tip: avoid harsh solvents when cleaning to preserve cone integrity.

How does the dedicated tweeter improve audio performance?

The dedicated tweeter reproduces high frequencies with greater detail and lower distortion than a single full-range driver. This enhances clarity and imaging at higher volumes; tip: verify correct tweeter polarity and positioning to maintain a coherent soundstage.

What impedance is the PS694 and what amplifier should I use with it?

The PS694 has a nominal 4-ohm impedance, matching most car head units and amplifiers. Use an amplifier channel able to deliver clean power near the speaker's 180 W RMS rating; tip: avoid driving the speaker with an underpowered amp to prevent clipping and distortion.

Can I install the PS694 in typical factory speaker locations?

The 6x9 form factor allows installation in many factory rear deck or door locations, but check depth, mounting hole pattern, and grille clearance first. The steel basket adds rigidity for secure mounting; tip: use spacers or adapters if factory openings differ slightly from the speaker footprint.

What causes distortion at high volumes and how can I avoid it?

Distortion usually comes from amplifier clipping, overdriving the speaker beyond its RMS rating, or mechanical limits. To avoid distortion, match amplifier power to RMS, set gains properly, and ensure proper wiring. Tip: if distortion persists, lower gain and verify source signal quality.

How should I wire the PS694 with an aftermarket amplifier or head unit?

Connect the PS694 as a standard 4-ohm speaker load, ensuring correct polarity for phase coherence. If using an aftermarket amplifier, set the gain to match source output and apply appropriate crossover settings. Tip: use quality connectors, route cables away from power wires, and secure grounds to reduce noise.

What maintenance and care does the Kicker PS694 require for long life?

Maintain the PS694 by keeping it free of dust and debris, inspecting mounting hardware, and avoiding direct exposure to standing water. Clean gently with a soft, damp cloth and mild soap if necessary. Tip: periodically check wiring and connections to prevent corrosion and intermittent performance.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5