Klipsch IC-525-T (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the speaker in a suspended ceiling?
To install the speaker in a suspended ceiling, use the tilebridge provided. Fold the rail side of the reinforcement ring back using the spring tensioner, insert it into the cutout hole, and release the ring to unfold. Position the tilebridge over the cutout hole, ensuring the tile rails rest on the t-grid struts.
What tools are needed for installation?
The installation requires a #2 Phillips screwdriver to tighten the dog clamps, along with the included screws, rails, reinforcement ring, and cardboard cutout template for cutting the ceiling hole.
How do I cut the hole in the ceiling?
Use the cardboard cutout template provided with the speakers or follow the measurements listed for each model. Ensure the hole size matches the specified diameter for your specific speaker model.
What are the recommended hole sizes for each model?
The hole sizes vary by model: IC-400-T and IC-525-T require a 9.125" diameter, IC-650-T requires 10.125", and IC-800-T requires 12.625". Always verify the size before cutting.
How do I connect the wiring to the speaker?
Access the wiring compartment by removing the terminal cover on the back of the speaker (or side for IC-500-T-SC). Feed wires through the conduit/wire adapter and connect to the input terminal according to the desired operation mode, ensuring proper polarity.
Can I use this speaker with a 70V or 100V distributed system?
Yes, for 70V or 100V systems, set the switch on the front panel to the desired setting. For IC-500-T-SC, ensure proper terminal connection to avoid speaker or amplifier damage.
What are the impedance and power ratings for each model?
Impedance and power ratings vary by model. For example, the IC-400-T has selectable taps for 8Ω with power ratings from 1.875W to 30W, while the IC-800-T has taps for 8Ω with power from 1.875W to 100W. Refer to the specifications for exact values.
How do I secure the speaker to the ceiling?
After inserting the speaker into the cutout hole, use a #2 Phillips screwdriver to tighten the four dog clamps until they are securely seated against the ceiling surface. Avoid overtightening to prevent damage.
What safety precautions should I follow during installation?
Always follow the safety instructions provided, including not exposing the speaker to water, ensuring proper ventilation, and using only the recommended tools and accessories. Do not modify or alter the speaker in any way.
What should I do if I need to access the wiring compartment again?
To access the wiring compartment, simply remove the terminal cover on the back of the speaker (or side for IC-500-T-SC). Ensure the conduit/wire adapter is securely tightened after reconnecting the wires to prevent any loose connections.
Related products from Klipsch
HERITAGE Cornwall
User manual 8 pages
HERITAGE Klipschorn
User manual 8 pages
HERITAGE LaScala
User manual 8 pages
Heritage
User manual 8 pages
Heritage
User manual 8 pages
Heritage
User manual 37 pages
Heritage
User manual 37 pages
Heritage
User manual 56 pages
RIC-65
User manual 8 pages
RW-100SW
User manual 8 pages
RW-34C
User manual 8 pages
PRO-7502-L-THX
User manual 10 pages
PRO-7502-S THX
User manual 10 pages
THX-8000-S
User manual 10 pages
RS-3
User manual 12 pages
Groove
User manual 55 pages
PRO-12SW-LS
User manual 16 pages
PRO-10SW-LS
User manual 16 pages
PRO-500T-LS
User manual 16 pages
R-15PM-1
User manual 16 pages